ZFS sync script

Sync

Like all of my scripts this script is coming without any guaranties!!! You can use it on your own risk!

About the script

• It uses mbuffer. It is easy to compile.
• It uses gawk.
• The variable SECURE defines if you want to use ssh to encrypt your stream. Set it to yes or no.
• To mark the datasets to copy from the backup host use this on the source:

# /usr/sbin/zfs set de.timmann:auto-backup=<backup host> <dataset>

• Run the script on the destination/backup host.
• If you don't want to use root as backup-user on source host do this to create a zfssync user (Solaris syntax):

# useradd -m zfssync
# passwd -N zfssync
# usermod -K type=normal zfssync

• Make an ssh-key exchange to login without password for SRC_USER.

Good luck!

zfs_sync.sh

#!/bin/bash
 
# Written by Lars Timmann <L@rs.Timmann.de> 2013
 
# This script is a rotten bunch of code... rewrite it!

# Some defaults
BACKUP_PROPERTY="de.timmann:auto-backup"
BACKUP_SNAPSHOT_NAME="zfssync"
MBUFFER_PORT=10001
MBUFFER=/opt/mbuffer/bin/mbuffer;
SRC_USER=zfssync
INITIAL_COPIES=3
# Default yes means use SSH for encryption over the net. Every other value means just mbuffer.
SECURE="yes" 
LOCAL_SYNC="no" 
MBUFFER_PORT=10001
MBUFFER_OPTS="-v 0 --md5 -s 128k -m 256M"
BACKUP_PROPERTY="de.timmann:auto-backup"
 
ZFS=/usr/sbin/zfs
SSH="/usr/bin/ssh -xc blowfish"
AWK=/usr/bin/gawk
#AWK=/opt/sfw/bin/gawk
GREP=/usr/bin/grep
DATE=/usr/bin/date
MD5="/usr/bin/digest -a md5"
ROUTE=/usr/sbin/route
MBUFFER="/opt/mbuffer/bin/mbuffer"
 
MYHOST=$(/usr/bin/hostname)
MYNAME=$(/usr/bin/basename $0)

function usage () {
  if [ $# -gt 0 ]
  then
    if [ "_${1}_" != "_help_" ]
    then
      echo "Error: ${MYNAME} : $*"
    fi
  else
    echo "Error: ${MYNAME} : Check parameters"
  fi
  cat <<EOU
Usage: ${MYNAME} <params>
Where params is from this set of parameters:
-s|--src-ip <IP>        The host from where we want to sync
-d|--dst-ip <IP>        The IP on this host where the remote mbuffer should try to connect to
                        If omitted the IP to use is guessed via route get.
-u|--user <user>        The user on "--src-ip" which has rights to send a zfs.
                        It must be able to login via ssh with public key.
                        On Solaris it is the profile "ZFS File System Management"
                        Try this on the "--src-ip":
                        # roleadd \
                            -d /export/home/zfssync \
                            -c "User for zfs send/recv" \
                            -s /bin/bash \
                            -m \
                            -P "ZFS File System Management" \
                             zfssync
                        # rolemod -K type=normal zfssync
                        # passwd -N zfssync
        
                        And then put the ssh-public-key from this host into
                           /export/home/zfssync/.ssh/authorized_keys
                        on the "--src-ip".
                        Remember to set the permissions on .ssh to 700 and .ssh/authorized_keys to 600.
                        The Homedir of the user must not be world writeable.

-sp|--src-pool <zpool>  The zpool we want to sync from "--src-ip".
-dp|--dst-pool <zpool>  The zpool on this host where we want to sync to ${MYNAME}.
-mbp|--mbuffer-port <port>
                        If the default port 10001 is in use use another port.
-mb|--mbuffer-path <path>
                        Path of mbuffer binary including binary itself.
-mbbw|--mbuffer-bwlimit <rate>
                        Limit the read bandwith of mbuffer (mbuffer option -r) 
                        From mbuffer --help: limit read rate to <rate> B/s, where <rate> can be given in b,k,M,G
-bp|--backup-property <property>
                        This defaults to ${BACKUP_PROPERTY}.
                        You have to set this property on all ZFS datasets to ${MYHOST}.
                        # /usr/sbin/zfs set ${BACKUP_PROPERTY}=${MYHOST} <dataset>
                        This is inherited as usual.
-bsn|--backup-snap-name <snapshotname>
                        This is the name of the snapshot which we use to sync.
                        This defaults to ${BACKUP_SNAPSHOT_NAME}.
                        Never delete this snapshot manually or you will break the sync and restart
                        from the beginning.
-i|--insecure           Not for production environments! No ssh tunneling. No encryption over the net!
EOU
##-l|--local            Just do a local zfs send/recv...
  exit 1
}

while [ $# -gt 0 ]
do
  #if [ $# -ge 2 ]; then value=$2; fi
  case $1 in
  --help|-h)
    usage "help"
    ;;
  -l|--local)
    LOCAL_SYNC="yes"
    SRC_HOST="localhost"
    param="dummy"
    shift;
    ;;
  -i|--insecure|--fuck-off-security)
    SECURE="no"
    param="dummy"
    shift;
    ;;
  --?*=?*|-?*=?*)
    param=${1%=*}
    value=${1#*=}
    shift;
    ;;
  --?*=|-?*=)
    param=${1%=*}
    usage "${param} needs a vlaue!"
    ;;
  *)
    param=$1
    if [ $# -ge 2 -a "_${2%-*}_" != "__" ]
    then
      value=$2
      shift
    fi
    shift
    ;;
  esac

  
  case $param in
  -s|--src-ip)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    SRC_HOST=${value}
    ;;
  -d|--dst-ip)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    DST_HOST=${value};
    ;;
  -u|--user)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    SRC_USER=${value}
    ;;
  -sp|--src-pool)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    SRC_POOL=${value}
    ;;
  -bsn|--backup-snap-name)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    BACKUP_SNAPSHOT_NAME=${value}
    ;;
  -dp|--dst-pool)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    DST_POOL=${value}
    ;;
  -mbp|--mbuffer-port)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    MBUFFER_PORT=${value}
    ;;
  -mb|--mbuffer-path)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    MBUFFER=${value}
    ;;
  -mbbw|--mbuffer-bwlimit)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    MBUFFER_OPTS="${MBUFFER_OPTS} -r ${value}"
    ;;
  -bp|--backup-property)
    if [ -z $value ] ; then usage "Param ${param} needs a value" ; fi
    BACKUP_PROPERTY=${value}
    ;;
  dummy)
    ;;
  *)
    usage "Unknown parameter $1" 
  esac
done

if [ "_${LOCAL_SYNC}_" == "no" ]
then
  if [ -z ${SRC_HOST} ]; then usage "-s|--src-ip is missing" ; fi

  # Guess the right IP for communication with source host
  if [ -z ${DST_HOST} ]; then
    DST_HOST=$(${ROUTE} -vn get ${SRC_HOST} | ${AWK} '{ip=$2}END{print ip}')
    if [ -z ${DST_HOST} ]; then
      usage "-d|--dst-ip is missing"
    fi
  fi 
fi
if [ -z ${SRC_POOL} ]; then usage "-sp|--src-pool is missing" ; fi
if [ -z ${DST_POOL} ]; then usage "-dp|--dst-pool is missing" ; fi

 
 
 
 
SRC_DATASETS=/tmp/${MYNAME}_${DST_POOL/\//_}_src_ds.out
DST_DATASETS=/tmp/${MYNAME}_${DST_POOL/\//_}_dst_ds.out
LOCK_FILE=/var/run/${MYNAME}_${DST_POOL/\//_}.lck
TMP_FILE1=/tmp/${MYNAME}_${DST_POOL/\//_}.tmp1
TMP_FILE2=/tmp/${MYNAME}_${DST_POOL/\//_}.tmp2
 
START_TIME=$(${AWK} 'BEGIN{printf systime();}')
${AWK} -v time=${START_TIME} 'BEGIN{print "START:",strftime("%d.%m.%Y %H:%M.%S",time)}'
 
 
# Clean up on signal
# -------------------------
trap 'echo "\n--- Got signal: Exiting ...\n"; \
      date ; \
      sleep 3; kill -9 ${!} 2>/dev/null; \
      /usr/bin/rm -f ${LOCK_FILE}; \
      exit 1' 1 2 3 13 14 15 18
###########################
 
 
if [ -f ${LOCK_FILE} ] ; then
  echo "$0 is allready running as PID $(/usr/bin/cat ${LOCK_FILE}) look in ${LOCK_FILE}"
  exit 1
else
  echo $$ > ${LOCK_FILE}
fi
 

if [ "_${LOCAL_SYNC}_" == "_yes_" ]
then
  ${ZFS} list -rH -t filesystem,snapshot,volume -o name,type,${BACKUP_PROPERTY} -s creation ${SRC_POOL} > ${SRC_DATASETS} &
else
  ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} "${ZFS} list -rH -t filesystem,snapshot,volume -o name,type,${BACKUP_PROPERTY} -s creation ${SRC_POOL}" > ${SRC_DATASETS} &
fi

${ZFS} list -rH -t filesystem,snapshot,volume -o name,type -s creation ${DST_POOL} > ${DST_DATASETS} &
wait
 
function convert_to_poolname () {
  from_zfs=$1
  search=$2
  replace=$3
  echo ${from_zfs} | sed -e "s#^${search}#${replace}#g"
}
 
function is_available () {
  snapshot=$1
  list=$2
  ${AWK} -v snapshot=${snapshot} 'BEGIN{rc=1;}$1 == snapshot{print $1; rc=0;}END{exit rc;}' ${list}
  return $?
}
 
function expire_dst_pool_snapshots () {
  days_to_keep=$1
  min_to_keep=$2
  for expired_zfs in $(
  ${ZFS} list -o creation,name -S creation -t snapshot | \
  ${AWK} \
        -v days_to_keep=${days_to_keep} \
        -v min_to_keep=${min_to_keep} \
        -v DST_POOL="^${DST_POOL}" \
  '
  BEGIN{
    split("Jan:Feb:Mar:Apr:May:Jun:Jul:Aug:Sep:Oct:Nov:Dec",mon,":");
    for(m in mon){
      month[mon[m]]=m
    };
    expire_date=systime()-days_to_keep*60*60*24
  }
  $NF ~ DST_POOL {
    filesystem=$NF;
    gsub(/@.*$/,"",filesystem);
    split($4,time,":");
    filesystem_date=mktime(sprintf("%d %02d %02d %02d %02d 00", $5, month[$2], $3, time[1], time[2]));
    count[filesystem]++;
    if(filesystem_date < expire_date && count[filesystem] > min_to_keep )
    {
      print $NF;
    }
  }')
  do
    printf "$(${DATE}) Destroying snapshot ${expired_zfs}\n"
    ${ZFS} destroy ${expired_zfs}
  done
}
 
function get_src_list () {
  ${AWK} -v backup_server=${MYHOST} '
    ( $2=="filesystem" || $2=="volume" ) && $3==backup_server {
      path[$1]=1;
      for(name in path){
        # delete name from list, if name is substring of $1
        if( index($1,name)==1 && name != $1 && path[name]!=0 ){
          path[name]=0;
        }
      }
    }
    END{
      for(name in path){
        if(path[name]==1) print name
      }
    }
  ' ${SRC_DATASETS}
}
 
function first_snapshot () {
  ${AWK} -v zfs="${1}@" '
    $2=="snapshot" && $1 ~ zfs {
      first=$1;
      # und raus...
      nextfile;
    }
    END{
      print first;
    }
  ' $2
}
 
function last_snapshot () {
  ${AWK} -v zfs="^${1}" -F '[@ \t]' '
    $3 == "snapshot" && $1 ~ zfs {
      last=$1"@"$2;
    }
    END{
      printf last;
    }
  ' $2
}
 
function get_incremental_snapshot () {
  src_host=$1
  src_datasets=$2
  first=$3
  last=$4
  dst_pool=$5
  dst_datasets=$6
 
  if [ $# -lt 6 ] ; then
    echo "Called from line ${BASH_LINENO[$i]} with $# Arguments"
    end 1
  fi
 
  src_zfs=$(echo ${first} | ${AWK} -F'@' '{print $1}')
  first_snap=$(echo ${first} | ${AWK} -F'@' '{print FS""$2}')
 
  echo "Getting snapshot ${zfs}..."
 
  if [ "_${LOCAL_SYNC}_" == "_yes_" ]
  then
    ${ZFS} send -I ${first_snap} ${last} | ${ZFS} recv -vFd ${dst_pool}
  else 
    if [ "_${SECURE}_" == "_yes_" ]
    then
      # setup receiver
      ${MBUFFER} ${MBUFFER_OPTS} -l ${TMP_FILE1} -I 127.0.0.1:${MBUFFER_PORT} | \
        ${ZFS} recv -vFd ${dst_pool} 2>&1 &
   
      # start sender
      ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} \
        -R ${MBUFFER_PORT}:127.0.0.1:${MBUFFER_PORT} \
        "${ZFS} send -I ${first_snap} ${last} | ${MBUFFER} ${MBUFFER_OPTS} -O 127.0.0.1:${MBUFFER_PORT} 2>&1" >${TMP_FILE2} &
    else
      # setup receiver
      ${MBUFFER} ${MBUFFER_OPTS} -l ${TMP_FILE1} -I ${MBUFFER_PORT} | \
        ${ZFS} recv -vFd ${dst_pool} 2>&1 &
   
      # start sender
      ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} \
        "${ZFS} send -I ${first_snap} ${last} | ${MBUFFER} ${MBUFFER_OPTS} -O ${DST_HOST}:${MBUFFER_PORT} 2>&1" >${TMP_FILE2} &
    fi
    wait
    local_md5=$(grep md5 ${TMP_FILE1})
    remote_md5=$(grep md5 ${TMP_FILE2})
    local_summary=$(grep summary ${TMP_FILE1})
    remote_summary=$(grep summary ${TMP_FILE2})
    printf "remote %s\nlocal  %s\n" "${remote_md5}" "${local_md5}"
    printf "remote %s\nlocal  %s\n" "${remote_summary}" "${local_summary}"
    rm -f ${TMP_FILE1} ${TMP_FILE2}
  fi
}
 
function get_initial_snapshot () {
  src_host=$1
  src_datasets=$2
  zfs=$3
  dst_pool=$4
  dst_datasets=$5
  if [ -z "$(is_available ${zfs} ${dst_datasets})" ] ; then
    echo "Getting snapshot ${zfs}..."
    if [ "_${LOCAL_SYNC}_" == "_yes_" ]
    then
      ${ZFS} send -R ${zfs} | ${ZFS} recv -vFd ${dst_pool}
    else 
      if [ "_${SECURE}_" == "_yes_" ]
      then
        # setup receiver
        ${MBUFFER} ${MBUFFER_OPTS} -l ${TMP_FILE1} -I 127.0.0.1:${MBUFFER_PORT} | \
          ${ZFS} recv -vFd ${dst_pool} 2>&1 &
   
        # start sender
        ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} \
          -R ${MBUFFER_PORT}:127.0.0.1:${MBUFFER_PORT} \
          "${ZFS} send -R ${zfs} | ${MBUFFER} ${MBUFFER_OPTS} -O 127.0.0.1:${MBUFFER_PORT} 2>&1" >${TMP_FILE2} &
      else
        # setup receiver
        ${MBUFFER} ${MBUFFER_OPTS} -l ${TMP_FILE1} -I ${MBUFFER_PORT} | \
          ${ZFS} recv -vFd ${dst_pool} 2>&1 &
   
        # start sender
        ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} \
          "${ZFS} send -R ${zfs} | ${MBUFFER} ${MBUFFER_OPTS} -O ${DST_HOST}:${MBUFFER_PORT} 2>&1" >${TMP_FILE2} &
      fi
      wait
      local_md5=$(grep md5 ${TMP_FILE1})
      remote_md5=$(grep md5 ${TMP_FILE2})
      local_summary=$(grep summary ${TMP_FILE1})
      remote_summary=$(grep summary ${TMP_FILE2})
      printf "remote %s\nlocal  %s\n" "${remote_md5}" "${local_md5}"
      printf "remote %s\nlocal  %s\n" "${remote_summary}" "${local_summary}"
      rm -f ${TMP_FILE1} ${TMP_FILE2}
    fi
  fi
}
 
function timestamp () {
  echo $(${DATE} '+%Y%m%d-%H:%M:%S')
}
 
function expire_backup_snapshots () {
  src_host=$1
  src_datasets=$2
  dst_datasets=$3
  src_last_to_keep=$4
  dst_pool=$5
 
  src_zfs=$(echo ${src_last_to_keep} | ${AWK} -F'@' '{print $1}')
  dst_zfs=$(convert_to_poolname ${src_zfs} ${SRC_POOL} ${dst_pool})
  dst_last_to_keep=$(convert_to_poolname ${src_last_to_keep} ${SRC_POOL} ${dst_pool})
 
  echo "Deleting old backup snapshots before ${dst_last_to_keep}"
  if ( ${ZFS} list -o name ${dst_last_to_keep} >/dev/null 2>&1 ) ; then
    for src_backup_snapshot in $(${AWK} -v src_backup="${src_zfs}@${BACKUP_SNAPSHOT_NAME}" -v src_last_to_keep="${src_last_to_keep}" '
        $1 == src_last_to_keep {
          exit 0;
        }
        $1 ~ src_backup {
          print $1;
        }
        ' ${src_datasets}) 
    do
      printf "\tDeleting on src ${src_backup_snapshot} ..."
      if [ "_${LOCAL_SYNC}_" == "_yes_" ]
      then
        ${ZFS} destroy ${src_backup_snapshot}
        status=$?
      else 
        ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} "${ZFS} destroy ${src_backup_snapshot}"
        status=$?
      fi
      if [ ${status} -eq 0 ] ; then
        echo "done"
      else
        echo "failed"
      fi
    done
    for dst_backup_snapshot in $(${AWK} -v dst_backup="${dst_zfs}@${BACKUP_SNAPSHOT_NAME}" -v dst_last_to_keep=${dst_last_to_keep} '
        $1 == dst_last_to_keep {
          exit 0;
        }
        $1 ~ dst_backup {
          print $1;
        }
        ' ${dst_datasets}) 
    do
      printf "\tDeleting on destination ${dst_backup_snapshot} ..."
      if ( ${ZFS} destroy ${dst_backup_snapshot} ) ; then
        echo "done"
      else
        echo "failed"
      fi
    done
  else
    echo "Strange we do not have the copy of ${dst_last_to_keep} => STOP!"
  fi
}
 
function end () {
  /usr/bin/rm -f ${LOCK_FILE}
  exit $1
}
 
for src_zfs in $(get_src_list) ; do
  echo "Evaluating ${src_zfs}"
  dst_zfs=$(convert_to_poolname ${src_zfs} ${SRC_POOL} ${DST_POOL})
  last_src=$(last_snapshot ${src_zfs} ${SRC_DATASETS})
  last_dst=$(last_snapshot ${dst_zfs} ${DST_DATASETS})
  last_backup_src=$(${AWK} -v zfs="${src_zfs}@${BACKUP_SNAPSHOT_NAME}" '$1 ~ zfs{last=$1}END{printf last}' ${SRC_DATASETS})
  last_backup_dst=$(${AWK} -v zfs="${dst_zfs}@${BACKUP_SNAPSHOT_NAME}" '$1 ~ zfs{last=$1}END{printf last}' ${DST_DATASETS})
  last_dst_on_src=$(convert_to_poolname ${last_dst} ${DST_POOL} ${SRC_POOL})
  this_backup_src=${src_zfs}@${BACKUP_SNAPSHOT_NAME}_$(timestamp)
 
  # Create snapshot for incremental backups
  if [ "_${LOCAL_SYNC}_" == "_yes_" ]
  then
    ${ZFS} snapshot ${this_backup_src}
  else
    ${SSH} ${SRC_USER:+"${SRC_USER}@"}${SRC_HOST} "${ZFS} snapshot ${this_backup_src}"
  fi
  if [ -z "${last_src}" ] ; then
    last_src=${this_backup_src}
  fi
  if [ -n "$(is_available ${dst_zfs} ${DST_DATASETS})" -a -z "${last_dst}" ] ; then
    echo "zfs is on dst, but no snapshots. Getting ${last_src}..."
    get_initial_snapshot ${SRC_HOST} ${SRC_DATASETS} ${last_src} ${DST_POOL} ${DST_DATASETS}
  # Look for last backup snapshot on destination
  elif [ -n "${last_backup_dst}" ] ; then
    # Name of last backup snapshot on src
    last_dst_backup_on_src=$(convert_to_poolname ${last_backup_dst} ${DST_POOL} ${SRC_POOL})
 
    # If converted name is not empty and snapshot is in the list of src snapshots
    # then get all snapshots from last backup until now
    if [ -n "${last_dst_backup_on_src}" ] ; then
      if [ -n "$(is_available ${last_dst_backup_on_src} ${SRC_DATASETS})" ] ; then
        # Get the snapshot of this backup
        printf "%s\tsnapshot\n" ${this_backup_src} >> ${SRC_DATASETS}
        get_incremental_snapshot ${SRC_HOST} ${SRC_DATASETS} ${last_dst_backup_on_src} ${this_backup_src} ${DST_POOL} ${DST_DATASETS} && \
          expire_backup_snapshots ${SRC_HOST} ${SRC_DATASETS} ${DST_DATASETS} ${this_backup_src} ${DST_POOL}
      fi
    fi
  elif [ -n "$(is_available ${dst_zfs} ${DST_DATASETS})" ] ; then
    # No last backup snapshot on dst but we have snapshots
    if [ -n "$(is_available ${last_dst_on_src} ${SRC_DATASETS})" ] ; then
      echo "Try to backup from ${last_dst_on_src} to ${this_backup_src}"
      first=${last_dst_on_src}
      last=${last_src}
      get_incremental_snapshot ${SRC_HOST} ${SRC_DATASETS} ${first} ${last} ${DST_POOL} ${DST_DATASETS} && \
        expire_backup_snapshots ${SRC_HOST} ${SRC_DATASETS} ${DST_DATASETS} ${this_backup_src} ${DST_POOL}
      # Get the snapshot of this backup
      printf "%s\tsnapshot\n" ${this_backup_src} >> ${SRC_DATASETS}
      get_incremental_snapshot ${SRC_HOST} ${SRC_DATASETS} ${last} ${this_backup_src} ${DST_POOL} ${DST_DATASETS} && \
        expire_backup_snapshots ${SRC_HOST} ${SRC_DATASETS} ${DST_DATASETS} ${this_backup_src} ${DST_POOL}
    else
      echo "OK I tried hard... now it is your job..."
    fi
  else
    # No existing copies for this zfs. Get the last <INITIAL_COPIES> copies
    first=$(${AWK} -v zfs=${src_zfs} -v intitial_copies=$((${INITIAL_COPIES}-1)) '
      $1 ~ zfs && $2=="snapshot" {
        last[++count]=$1;
      }
      END {
        if(count>intitial_copies){
          print last[count-intitial_copies]
        }else{
          print last[1]
        }
      }' ${SRC_DATASETS})
    last=$( ${AWK} -v zfs=${src_zfs} '$1 ~ zfs && $2=="snapshot"{last=$1}END{printf last}' ${SRC_DATASETS} )
    get_initial_snapshot ${SRC_HOST} ${SRC_DATASETS} ${first} ${DST_POOL} ${DST_DATASETS}
    get_incremental_snapshot ${SRC_HOST} ${SRC_DATASETS} ${first} ${last} ${DST_POOL} ${DST_DATASETS} && \
      expire_backup_snapshots ${SRC_HOST} ${SRC_DATASETS} ${DST_DATASETS} ${this_backup_src} ${DST_POOL}
    # Get the snapshot of this backup
    printf "%s\tsnapshot\n" ${this_backup_src} >> ${SRC_DATASETS}
    get_incremental_snapshot ${SRC_HOST} ${SRC_DATASETS} ${last} ${this_backup_src} ${DST_POOL} ${DST_DATASETS} && \
      expire_backup_snapshots ${SRC_HOST} ${SRC_DATASETS} ${DST_DATASETS} ${this_backup_src} ${DST_POOL}
  fi  
 
  echo
  echo --------------------------------------------------------------------------------
  date
  echo
done
 
# expire_dst_pool_snapshots days_to_keep min_to_keep
expire_dst_pool_snapshots 34 70
 
END_TIME=$(${AWK} 'BEGIN{printf systime();}')
${AWK} -v time=${END_TIME} 'BEGIN{print "END  :",strftime("%d.%m.%Y %H:%M.%S",time)}'
${AWK} -v start=${START_TIME} -v end=${END_TIME} 'BEGIN{print "DURATION:",strftime("%H:%M.%S",end-start-3600*strftime("%H",0))}'
end 0