NetApp SMO

Installation des SnapManager for Oracle unter Solaris

HostUtilities

# cd /tmp
# gtar xzf ~/smo/netapp_solaris_host_utilities_5_1_sparc.tar.gz
# pkgadd -d  NTAPSANTool.pkg 

Und um Himmelswillen nicht:

# /opt/NTAP/SANToolkit/bin/mpxio_set -e  --no-never-do-this

Dann klapp ALUA nicht!

# /opt/NTAP/SANToolkit/bin/basic_config -ssd_set
# touch /reconfigure
# init 6

Test mit:

# /opt/NTAP/SANToolkit/bin/sanlun fcp show adapter
# /opt/NTAP/SANToolkit/bin/sanlun lun show all

SnapDrive

# cd /tmp
# gtar xzf ~/smo/NTAPsnapdrive_sun_sparc_5.0P1.tar.Z
# pkgadd -d NTAPsnapdrive_sun_sparc_5.0/NTAPsnapdrive.pkg 

Jetzt noch die /opt/NTAPsnapdrive/snapdrive.conf anpassen. Und für Solaris mit MPxIO und UFS sieht die /opt/NTAPsnapdrive/snapdrive.conf dann so aus:

# Snapdrive Configuration
#   file:   /opt/NTAPsnapdrive/snapdrive.conf
#   Version 5.0 (Change 1612424 Built 'Sun Feb 26 03 11 54 PST 2012')
#
# Default values are shown by lines which are commented-out in this file.
# If there is no un-commented-out line in this file relating to a particular value, then
# the default value represented in the commented-out line is what SnapDrive will use.
#
# To change a value:
#
#     -- copy the line that is commented out to another line
#     -- Leave the commented-out line
#     -- Modify the new line to remove the '#' and to set the new value.
#     -- Save the file and exit
#     -- Also remember to restart the snapdrive daemon by issuing 'snapdrived restart'
#
#
#PATH="/sbin:/usr/sbin:/bin:/usr/lib/vxvm/bin:/usr/bin:/opt/VRTS/bin:/etc/vx/bin" #toolset search path
all-access-if-rbac-unspecified="on" #Allows access to all filer operations if the RBAC permissions file is missing in filer volume
#audit-log-file="/var/log/sd-audit.log" #Audit Log File Path
#audit-log-max-size=20480 #Maximum size (in bytes) of audit log file
#audit-log-save=2 #Number of historical audit log file to save
#autosupport-enabled="on" #Enable autosupport (requires autosupport-filer be set)
#available-lun-reserve=8 #Number of LUNs for which to reserve host resources
#check-export-permission-nfs-clone="on" #Checks if the host has nfs export permissions for resource being connected
#client-trace-log-file="/var/log/sd-client-trace.log" #client trace log file (Probably never used or useful)
#cluster-operation-timeout-secs=600 #Cluster Operation timeout in seconds (Useful only on SFRAC Environments). Increase this value if you frequent failures in SFRAC environments
#contact-http-dfm-port=8088 #HTTP server port to contact to access the DFM (Change this only if you have modified DFM Server settings)
#contact-http-port=80 #HTTP port to contact to access the filer (This should not be changed most of the time)
#contact-http-port-sdu-daemon=4094 #HTTP port on which sdu daemon will bind
#contact-https-port-sdu-daemon=4095 #HTTPS port on which sdu daemon will bind
#contact-ssl-dfm-port=8488 #SSL server port to contact to access the DFM
#contact-ssl-port=443 #SSL port to contact to access the filer
#contact-viadmin-port=8043 #HTTP/HTTPS port to contact to access the virtual interface admin
#daemon-trace-log-file="/var/log/sd-daemon-trace.log" #daemon trace log file
#datamotion-cutover-wait=120 #Wait time in seconds during data motion
#default-noprompt="off" #A default value for -noprompt option in the command line
default-transport="fcp" #Transport type to use for storage provisioning, when a decision is needed
#device-retries=3 #Number of retries on Ontap filer LUN device inquiry (This is no longer useful or used)
#device-retry-sleep-secs=1 #Number of seconds between Ontap filer LUN device inquiry retries (This is no longer useful or used)
#dfm-api-timeout=180 #Timeout in seconds for calling DFM API
#dfm-rbac-retries=12 #Number of access retries until DFM Refreshes (Increase this value if DFM is unable to discover newly created Volumes)
#dfm-rbac-retry-sleep-secs=15 #Number of seconds between DFM rbac access retries(Increase this value if DFM is unable to discover the Volume)
#do-lunclone="on" #Lunclone for Dataset mount_backup if readonly qtree is detected
#enable-alua="on" #Enable ALUA for the igroup
#enable-fcp-cache="on" #Enable FCP Cache in Assistants
#enable-implicit-host-preparation="on" #Enable implicit host preparation for LUN creation
#enable-parallel-operations="on" #Enable support for parallel operations
#enable-split-clone="off" #Enable split clone volume or lun during connnect/disconnect
#filer-restore-retries=1440 #Number of retries while doing lun restore
#filer-restore-retry-sleep-secs=15 #Number of secs between retries while restoring lun
#filesystem-freeze-timeout-secs=300 #File system freeze timeout in seconds
#flexclone-writereserve-enabled="off" #Enable space reservations during FlexClone creation
fstype="ufs" #File system to use when more than one file system is available
#lun-onlining-in-progress-retries=40 #Number of retries when lun onlining in progress after VBSR
#lun-onlining-in-progress-sleep-secs=3 #Number of secs between retries when lun onlining in progress after VBSR
#mgmt-retries=2 #Number of retries on ManageONTAP control channel
#mgmt-retry-sleep-long-secs=90 #Number of seconds between retries on ManageONTAP control channel (failover error)
#mgmt-retry-sleep-secs=2 #Number of seconds between retries on ManageONTAP control channel
#migrate-file="/opt/NTAPsnapdrive/.migfile" #Location of Migrate File
#multipathing-type="DMP" #Multipathing software to use when more than one multipathing solution is available.
multipathing-type="mpxio" #Multipathing software to use when more than one multipathing solution is available.
#password-file="/opt/NTAPsnapdrive/.pwfile" #location of password file
#portset-file="/opt/NTAPsnapdrive/.portset" #location of portset configuration file
#prefix-clone-name="" #Prefix string for naming FlexClone
#prefix-filer-lun="" #Prefix for all filer LUN names internally generated by storage create
#prepare-lun-count=16 #Number of LUNs for which to request host preparation
#rbac-cache="off" #Use RBAC cache when all DFM servers are down. Active only when rbac-method is dfm.
#rbac-method="native" #Role Based Access Control(RBAC) methods
#recovery-log-file="/var/log/sd-recovery.log" #recovery log file
#recovery-log-save=20 #Number of old copies of recovery log file to save
#san-clone-method="lunclone" #Clone methods for snap connect
#sdu-daemon-certificate-path="/opt/NTAPsnapdrive/snapdrive.pem" #location of https server certificate
#sdu-password-file="/opt/NTAPsnapdrive/.sdupw" #location of SDU Daemon and DFM password file
#secure-communication-among-cluster-nodes="off" #Enable Secure Communication (Useful only on SFRAC environments)
#sfsr-polling-frequency=10 #Sleep for the given amount of seconds before attempting SFSR
#snapconnect-nfs-removedirectories="off" #NFS snap connect cleaup unwanted dirs;
#snapcreate-cg-timeout="relaxed" #Timeout type used in snapshot creation with Consitency Groups.
#snapcreate-check-nonpersistent-nfs="on" #Check that entries exist in persistent filesystem file for specified nfs fs.
#snapcreate-consistency-retries=3 #Number of retries on best-effort snapshot consistency check failure
#snapcreate-consistency-retry-sleep=1 #Number of seconds between best-effort snapshot consistency retries
#snapcreate-must-make-snapinfo-on-qtree="off" #snap create must be able to create snapinfo on qtree
#snapdelete-delete-rollback-with-snap="off" #Delete all rollback snapshots related to specified snapshot
#snapmirror-dest-snap-support-enabled="on" #Enables snap restore and snap connect commands to deal with snapshots which were moved to another filer volume (e.g. via SnapMirror)
#snaprestore-delete-rollback-after-restore="on" #Delete rollback snapshot after a successfull restore
#snaprestore-make-rollback="on" #Create snap rollback before restore
#snaprestore-must-make-rollback="on" #Do not continue 'snap restore' if rollback creation fails
#snaprestore-snapmirror-check="on" #Enable snapmirror destination volume check in snap restore
#space-reservations-enabled="on" #Enable space reservations when creating new luns
#space-reservations-volume-enabled="snapshot" #Enable space reservation over volume.
#split-clone-async="on" #Lunclone for Dataset mount_backup if readonly qtree is detected
#trace-enabled="on" #Enable trace
#trace-level=7 #Trace levels: 1=FatalError; 2=AdminError; 3=CommandError; 4=warning, 5=info, 6=verbose, 7=full
#trace-log-file="/var/log/sd-trace.log" #trace log file
#trace-log-max-size=10485760 #Maximum size of trace log file in bytes; 0 means one trace log file per command
#trace-log-save=100 #Number of old copies of trace log file to save
#use-efi-label="off" #Enables use of EFI labels on Solaris which is required for lun size > 1 TB
#use-https-to-dfm="on" #Communication with DFM done via HTTPS instead of HTTP
use-https-to-filer="on" #Communication with filer done via HTTPS instead of HTTP
#use-https-to-sdu-daemon="off" #Communication with daemon done via HTTPS instead of HTTP
#use-https-to-viadmin="on" #Specifies if HTTPS must be used to communicate with SMVI Product
#vif-password-file="/opt/NTAPsnapdrive/.vifpw" #location of Virtual Interface Server password file
#virtualization-operation-timeout-secs=600 #Virtualization Operation timeout in seconds
#vmtype="vxvm" #Volume manager to use when more than one volume manager is available
vmtype="svm" #Volume manager to use when more than one volume manager is available
#vol-restore="off" #Method of restoring a volume
#volmove-cutover-retry=3 #Number of retries during volume migration
#volmove-cutover-retry-sleep=3 #Number of seconds between retries during volume migration cutover phase

Nun erst den snapdrived starten:

# /usr/sbin/snapdrived start

Verbindung mit dem Filer herstellen von SnapDrive:

# getent hosts fas01 >> /etc/hosts
# /opt/NTAPsnapdrive/bin/snapdrive config set root fas01
# /opt/NTAPsnapdrive/bin/snapdrive snap list -filer fas01

Check:

# /opt/NTAPsnapdrive/bin/snapdrive config list

SnapManager for Oracle

# sh ./netapp.smo.sunos-sparc64-3.2.bin
# smogui 

Ab durch den Wizard...