StorageTek SL150
From Lolly's Wiki
StorageTek SL150 Modular Tapelibrary
General Knowledge
Default Password
passw0rd
Solaris Configuration
To use the Ultrium-6 Tape drives with Solaris you have to put the following into your st.conf:
tape-config-list =
"HP Ultrium 6-SCSI ","HP Ultrium 6-SCSI","HP Ultrium 6","HP Ultrium LTO 6","HP_LTO_GEN_6";
HP_LTO_GEN_6 = 2,0x3B,0,0x18659,4,0x00,0x46,0x58,0x5A,3,60,1200,600,1200,600,600,18000
The vendor string has to be exactly 8 characters: HP<6 spaces>Product...
Unload the st driver after changing the st.conf:
# modunload -i $(modinfo | nawk '$6=="st"{print $1}')
Check if the new config settings matched the drive:
# mt -f /dev/rmt/0cn config
"HP Ultrium 6-SCSI", "HP Ultrium 6-SCSI ", "CFGHPULTRIUM6SCSI";
CFGHPULTRIUM6SCSI = 2,0x3B,0,0x18619,4,0x58,0x58,0x5A,0x5A,3,60,1200,600,1200,600,600,18000;
