Fibrechannel Analyse: Difference between revisions
m (Text replacement - "</source" to "</syntaxhighlight") |
|||
(16 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[ | [[category:Solaris]] | ||
[[ | [[category:Brocade]] | ||
[[ | [[category:NetApp]] | ||
[[ | [[category:FC]] | ||
=Fibrechannel Analyse= | =Fibrechannel Analyse= | ||
Line 9: | Line 9: | ||
===luxadm -e port=== | ===luxadm -e port=== | ||
Gibt die Hardwarepfade der vorhandened Fibrechannelports und deren Status aus: | Gibt die Hardwarepfade der vorhandened Fibrechannelports und deren Status aus: | ||
< | <syntaxhighlight lang=bash> | ||
# luxadm -e port | # luxadm -e port | ||
/devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl CONNECTED | /devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl CONNECTED | ||
Line 15: | Line 15: | ||
/devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:devctl CONNECTED | /devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:devctl CONNECTED | ||
/devices/pci@79,0/pci10de,376@e/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED | /devices/pci@79,0/pci10de,376@e/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED | ||
</ | </syntaxhighlight> | ||
2 Dualport Karten: | 2 Dualport Karten: | ||
/devices/pci@79,0/pci10de,378@b/pci1077,143@0 und ...,1 | /devices/pci@79,0/pci10de,378@b/pci1077,143@0 und ...,1 | ||
/devices/pci@79,0/pci10de,376@e/pci1077,143@0 und ...,1 | /devices/pci@79,0/pci10de,376@e/pci1077,143@0 und ...,1 | ||
< | <syntaxhighlight lang=bash> | ||
# prtdiag -v | head -1 | # prtdiag -v | head -1 | ||
System Configuration: Sun Microsystems Sun Fire X4440 | System Configuration: Sun Microsystems Sun Fire X4440 | ||
</ | </syntaxhighlight> | ||
Aus der Seite [https://support.oracle.com/epmos/faces/DocContentDisplay?id=1277396.1 Sun x86 Platforms: Matrix of Recognized Device Paths (Doc ID 1277396.1)] (Oracle Support Login benötigt): | Aus der Seite [https://support.oracle.com/epmos/faces/DocContentDisplay?id=1277396.1 Sun x86 Platforms: Matrix of Recognized Device Paths (Doc ID 1277396.1)] (Oracle Support Login benötigt): | ||
Line 41: | Line 41: | ||
===luxadm -e dump_map <HW_path>=== | ===luxadm -e dump_map <HW_path>=== | ||
Gibt die Tabelle der bekannten Geräte an einem Port aus | Gibt die Tabelle der bekannten Geräte an einem Port aus | ||
< | <syntaxhighlight lang=bash> | ||
# luxadm -e dump_map /devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl | # luxadm -e dump_map /devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl | ||
Pos Port_ID Hard_Addr Port WWN Node WWN Type | Pos Port_ID Hard_Addr Port WWN Node WWN Type | ||
Line 53: | Line 53: | ||
7 30500 0 203300a0b85aeb2d 200200a0b85aeb2d 0x0 (Disk device) | 7 30500 0 203300a0b85aeb2d 200200a0b85aeb2d 0x0 (Disk device) | ||
8 10800 0 2100001b32902d45 2000001b32902d45 0x1f (Unknown Type,Host Bus Adapter) | 8 10800 0 2100001b32902d45 2000001b32902d45 0x1f (Unknown Type,Host Bus Adapter) | ||
</ | </syntaxhighlight> | ||
Erklärung der interessanten Spalten: | Erklärung der interessanten Spalten: | ||
* Port_ID <Switch_ID><Switchport><??> | * Port_ID <Switch_ID><Switchport><??> | ||
Line 80: | Line 80: | ||
Disk Device: Storage | Disk Device: Storage | ||
Host Bus Adapter: FC-Karte | Host Bus Adapter: FC-Karte | ||
===luxadm -e rdls <HW_path> === | |||
<syntaxhighlight lang=bash> | |||
# luxadm -e port 2>/dev/null | awk '{print $1;}' | xargs -n 1 luxadm -e rdls 2>/dev/null | |||
Link Error Status information for loop:/devices/pci@0,0/pci8086,340e@7/pci111d,806e@0/pci111d,806e@2/pci1077,143@0/fp@0,0:devctl | |||
al_pa lnk fail sync loss signal loss sequence err invalid word CRC | |||
30200 2 1 0 0 0 0 | |||
30600 2 1 0 0 0 0 | |||
10200 1 1 0 0 0 0 | |||
11400 2 1 0 0 0 0 | |||
10b00 0 0 0 0 0 0 | |||
NOTE: These LESB counts are not cleared by a reset, only power cycles. | |||
These counts must be compared to previously read counts. | |||
Link Error Status information for loop:/devices/pci@0,0/pci8086,340e@7/pci111d,806e@0/pci111d,806e@2/pci1077,143@0,1/fp@0,0:devctl | |||
al_pa lnk fail sync loss signal loss sequence err invalid word CRC | |||
0 0 0 0 0 0 0 | |||
NOTE: These LESB counts are not cleared by a reset, only power cycles. | |||
These counts must be compared to previously read counts. | |||
</syntaxhighlight> | |||
===luxadm probe=== | ===luxadm probe=== | ||
Auflistung aller erkannten Fibrechanneldevices | Auflistung aller erkannten Fibrechanneldevices | ||
< | <syntaxhighlight lang=bash> | ||
#> luxadm probe | #> luxadm probe | ||
Line 90: | Line 111: | ||
Logical Path:/dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | Logical Path:/dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | ||
... | ... | ||
</ | </syntaxhighlight> | ||
===luxadm display <Diskpath|WWN>=== | ===luxadm display <Diskpath|WWN>=== | ||
< | <syntaxhighlight lang=bash> | ||
#> luxadm display /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | #> luxadm display /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | ||
DEVICE PROPERTIES for disk: /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | DEVICE PROPERTIES for disk: /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2 | ||
Line 130: | Line 151: | ||
Class secondary | Class secondary | ||
State STANDBY | State STANDBY | ||
</ | </syntaxhighlight> | ||
* Vendor: SUN | * Vendor: SUN | ||
Hersteller | Hersteller | ||
Line 154: | Line 175: | ||
Zuweisung Controller zum FC-Port über: | Zuweisung Controller zum FC-Port über: | ||
< | <syntaxhighlight lang=bash> | ||
# ls -al /dev/cfg/c6 | # ls -al /dev/cfg/c6 | ||
lrwxrwxrwx 1 root root 60 Sep 3 2009 /dev/cfg/c6 -> ../../devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:fc | lrwxrwxrwx 1 root root 60 Sep 3 2009 /dev/cfg/c6 -> ../../devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:fc | ||
</ | </syntaxhighlight> | ||
Man sieht den Hardwarepfad von [[#luxadm -e port]] | Man sieht den Hardwarepfad von [[#luxadm -e port]] | ||
Line 166: | Line 187: | ||
===fcinfo hba-port=== | ===fcinfo hba-port=== | ||
Gibt ein paar Infos über Hersteller, Modell, Firmware, Port und Node WWN, Current Speed, ... aus | Gibt ein paar Infos über Hersteller, Modell, Firmware, Port und Node WWN, Current Speed, ... aus | ||
< | <syntaxhighlight lang=bash> | ||
#> fcinfo hba-port | #> fcinfo hba-port | ||
HBA Port WWN: 2100001b328a417f | HBA Port WWN: 2100001b328a417f | ||
Line 224: | Line 245: | ||
Current Speed: not established | Current Speed: not established | ||
Node WWN: 2001001b32b04445 | Node WWN: 2001001b32b04445 | ||
</ | </syntaxhighlight> | ||
===fcinfo remote-port --port <HBA Port WWN> --linkstat=== | ===fcinfo remote-port --port <HBA Port WWN> --linkstat=== | ||
< | <syntaxhighlight lang=bash> | ||
# fcinfo remote-port --port 2100001b32904445 --linkstat | # fcinfo remote-port --port 2100001b32904445 --linkstat | ||
Remote Port WWN: 201600a0b86e103c | Remote Port WWN: 201600a0b86e103c | ||
Line 316: | Line 337: | ||
Invalid Tx Word Count: 0 | Invalid Tx Word Count: 0 | ||
Invalid CRC Count: 0 | Invalid CRC Count: 0 | ||
</ | </syntaxhighlight> | ||
===fcinfo remote-port --port <HBA Port WWN> --scsi-target=== | |||
<syntaxhighlight lang=bash> | |||
# fcinfo hba-port | grep HBA | |||
HBA Port WWN: 21000024ff3cf472 | |||
HBA Port WWN: 21000024ff3cf473 | |||
HBA Port WWN: 21000024ff3cf454 | |||
HBA Port WWN: 21000024ff3cf455 | |||
# fcinfo remote-port --port 21000024ff3cf472 --scsi-target | |||
Remote Port WWN: 20110002ac0059ce | |||
Active FC4 Types: SCSI | |||
SCSI Target: yes | |||
Node WWN: 2ff70002ac0059ce | |||
LUN: 0 | |||
Vendor: 3PARdata | |||
Product: VV | |||
OS Device Name: /dev/rdsk/c6t60002AC00000000000000002000059CEd0s2 | |||
LUN: 1 | |||
Vendor: 3PARdata | |||
Product: VV | |||
OS Device Name: /dev/rdsk/c6t60002AC00000000000000003000059CEd0s2 | |||
LUN: 2 | |||
Vendor: 3PARdata | |||
Product: VV | |||
OS Device Name: /dev/rdsk/c6t60002AC00000000000000004000059CEd0s2 | |||
... | |||
</syntaxhighlight> | |||
===fcinfo lu -v <device>=== | |||
<syntaxhighlight lang=bash> | |||
# fcinfo lu -v /dev/rdsk/c0t60030D90D9DD1A059655804D4A5EAD2Ed0s2 | |||
OS Device Name: /dev/rdsk/c0t60030D90D9DD1A059655804D4A5EAD2Ed0s2 | |||
HBA Port WWN: 2100000e1ed89451 | |||
Controller: /dev/cfg/c4 | |||
Remote Port WWN: 2100f4e9d4564d21 | |||
LUN: 11 | |||
State: active/optimized | |||
Remote Port WWN: 2100f4e9d4564c97 | |||
LUN: 11 | |||
State: active/non-optimized | |||
HBA Port WWN: 2100000e1ed89450 | |||
Controller: /dev/cfg/c3 | |||
Remote Port WWN: 2100f4e9d4564d44 | |||
LUN: 11 | |||
State: active/optimized | |||
Remote Port WWN: 2100f4e9d4564c1c | |||
LUN: 11 | |||
State: active/non-optimized | |||
Vendor: DataCore | |||
Product: Virtual Disk | |||
Device Type: Disk Device | |||
Unformatted capacity: 204800.000 MBytes | |||
</syntaxhighlight> | |||
==mpathadm== | ==mpathadm== | ||
===mpathadm list lu=== | ===mpathadm list lu=== | ||
< | <syntaxhighlight lang=bash> | ||
</ | </syntaxhighlight> | ||
==cfgadm== | ==cfgadm== | ||
===cfgadm -al -o show_FCP_dev [<controller>]=== | ===cfgadm -al -o show_FCP_dev [<controller>]=== | ||
< | <syntaxhighlight lang=bash> | ||
# cfgadm -al -o show_FCP_dev | grep unusable | # cfgadm -al -o show_FCP_dev | grep unusable | ||
c8::21000024ff2d49a2,0 disk connected configured unusable | c8::21000024ff2d49a2,0 disk connected configured unusable | ||
Line 341: | Line 414: | ||
c9::203500a0b839c421,31 disk connected configured unusable | c9::203500a0b839c421,31 disk connected configured unusable | ||
c9::203500a0b84913d2,31 disk connected configured unusable | c9::203500a0b84913d2,31 disk connected configured unusable | ||
</ | </syntaxhighlight> | ||
===cfgadm -c unconfigure -o unusable_SCSI_LUN <unusable device>=== | ===cfgadm -c unconfigure -o unusable_SCSI_LUN <unusable device>=== | ||
< | <syntaxhighlight lang=bash> | ||
# cfgadm -c unconfigure -o unusable_SCSI_LUN c8::21000024ff2d49a2 | # cfgadm -c unconfigure -o unusable_SCSI_LUN c8::21000024ff2d49a2 | ||
</ | </syntaxhighlight> | ||
Alle aufräumen: | |||
<syntaxhighlight lang=bash> | |||
# cfgadm -alo show_SCSI_LUN | nawk '$NF=="unusable"{gsub(/,[0-9]+$/,"",$1);print $1}' | sort -u | xargs -n 1 cfgadm -c unconfigure -o unusable_SCSI_LUN | |||
</syntaxhighlight> | |||
===cfgadm -o force_update -c configure <controller>=== | ===cfgadm -o force_update -c configure <controller>=== | ||
Rescan LUNs. Be careful! Does a forcelip! | Rescan LUNs. Be careful! Does a forcelip! | ||
< | <syntaxhighlight lang=bash> | ||
# cfgadm -o force_update -c configure c10 | # cfgadm -o force_update -c configure c10 | ||
</ | </syntaxhighlight> | ||
==prtconf -Da <device>== | ==prtconf -Da <device>== | ||
< | <syntaxhighlight lang=bash> | ||
# prtconf -Da /dev/cfg/c3 | # prtconf -Da /dev/cfg/c3 | ||
i86pc (driver name: rootnex) | i86pc (driver name: rootnex) | ||
Line 365: | Line 443: | ||
pci1077,170, instance #0 (driver name: qlc) <--- | pci1077,170, instance #0 (driver name: qlc) <--- | ||
fp, instance #0 (driver name: fp) | fp, instance #0 (driver name: fp) | ||
</ | </syntaxhighlight> | ||
==LUN masking (access LUNs of a storage)== | |||
<syntaxhighlight lang=bash> | |||
Nov 6 13:44:59 server01 Corrupt label; wrong magic number | |||
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@380/pci@1/pci@0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w204300a096691217,7 (ssd7): | |||
Nov 6 13:44:59 server01 Corrupt label; wrong magic number | |||
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@380/pci@1/pci@0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w204300a096691217,7 (ssd7): | |||
Nov 6 13:44:59 server01 Corrupt label; wrong magic number | |||
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@300/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w203300a096691217,7 (ssd2): | |||
Nov 6 13:44:59 server01 Corrupt label; wrong magic number | |||
... | |||
</syntaxhighlight> | |||
<syntaxhighlight lang=bash> | |||
# cat /etc/driver/drv/fp.conf | |||
mpxio-disable="no"; | |||
pwwn-lun-blacklist= | |||
"203200a096691265,7", | |||
"203300a096691265,7", | |||
"204200a096691265,7", | |||
"204300a096691265,7", | |||
"203200a096691217,7", | |||
"203300a096691217,7", | |||
"204200a096691217,7", | |||
"204300a096691217,7"; | |||
</syntaxhighlight> | |||
<syntaxhighlight lang=bash> | |||
# reboot -- -r | |||
... | |||
Boot device: /pci@300/pci@1/pci@0/pci@2/scsi@0/disk@p0 File and args: -r | |||
SunOS Release 5.11 Version 11.3 64-bit | |||
Copyright (c) 1983, 2015, Oracle and/or its affiliates. All rights reserved. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 203300a096691217 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 203200a096691217 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 203300a096691265 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 203200a096691265 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 204300a096691217 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 204200a096691217 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 204300a096691265 is masked due to black listing. | |||
/pseudo/fcp@0 (fcp0): | |||
LUN 7 of port 204200a096691265 is masked due to black listing. | |||
Configuring devices. | |||
</syntaxhighlight> | |||
=Kommandos : Common Array Manager= | =Kommandos : Common Array Manager= | ||
Line 371: | Line 502: | ||
Ist unter Solaris in /opt/SUNWsefms/bin | Ist unter Solaris in /opt/SUNWsefms/bin | ||
===lsscs list array=== | ===lsscs list array=== | ||
< | <syntaxhighlight lang=bash> | ||
</ | </syntaxhighlight> | ||
===lsscs list array <array_name>=== | ===lsscs list array <array_name>=== | ||
< | <syntaxhighlight lang=bash> | ||
</ | </syntaxhighlight> | ||
===lsscs list -a <array_name> fcport=== | ===lsscs list -a <array_name> fcport=== | ||
< | <syntaxhighlight lang=bash> | ||
</ | </syntaxhighlight> | ||
=Kommandos : Brocade= | =Kommandos : Brocade= | ||
Line 384: | Line 515: | ||
===switchshow=== | ===switchshow=== | ||
< | <syntaxhighlight lang=bash> | ||
san-sw_11:admin> switchshow | san-sw_11:admin> switchshow | ||
switchName: san-sw_11 | switchName: san-sw_11 | ||
Line 423: | Line 554: | ||
22 22 011600 -- N8 No_Module FC (No POD License) Disabled | 22 22 011600 -- N8 No_Module FC (No POD License) Disabled | ||
23 23 011700 -- N8 No_Module FC (No POD License) Disabled | 23 23 011700 -- N8 No_Module FC (No POD License) Disabled | ||
</ | </syntaxhighlight> | ||
Was sagt uns das? | Was sagt uns das? | ||
# Dies ist der "Principal" (alle andere sind "Subordinate") der Fabric "Fabric1" (switchRole:, zoning:) | # Dies ist der "Principal" (alle andere sind "Subordinate") der Fabric "Fabric1" (switchRole:, zoning:) | ||
Line 434: | Line 565: | ||
# 9 Ports sind belegt | # 9 Ports sind belegt | ||
< | ===fabricshow=== | ||
<syntaxhighlight lang=bash> | |||
san-sw_11:root> fabricshow | san-sw_11:root> fabricshow | ||
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name | Switch ID Worldwide Name Enet IP Addr FC IP Addr Name | ||
Line 442: | Line 574: | ||
The Fabric has 2 switches | The Fabric has 2 switches | ||
</ | </syntaxhighlight> | ||
===islshow=== | |||
<syntaxhighlight lang=bash> | |||
rz1_fab2_11:admin> islshow | |||
1: 1-> 0 10:00:00:05:1e:0d:5e:96 12 bc1_sl4_fab2_12 sp: 4.000G bw: 4.000G | |||
2: 2-> 0 10:00:00:05:1e:0d:e2:53 13 bc2_sl4_fab2_13 sp: 4.000G bw: 4.000G | |||
3: 3-> 0 10:00:00:05:1e:b3:71:bf 14 bc3_sl4_fab2_14 sp: 4.000G bw: 4.000G | |||
4: 5-> 17 10:00:00:05:1e:0d:5e:96 12 bc1_sl4_fab2_12 sp: 4.000G bw: 4.000G | |||
5: 6-> 17 10:00:00:05:1e:0d:e2:53 13 bc2_sl4_fab2_13 sp: 4.000G bw: 4.000G | |||
6: 7-> 17 10:00:00:05:1e:b3:71:bf 14 bc3_sl4_fab2_14 sp: 4.000G bw: 4.000G | |||
7: 10-> 8 10:00:50:eb:1a:45:71:96 15 rz-6510-fab2-15 sp: 4.000G bw: 4.000G | |||
8: 18-> 0 10:00:50:eb:1a:45:71:96 15 rz-6510-fab2-15 sp: 4.000G bw: 4.000G | |||
</syntaxhighlight> | |||
==Port-Kommandos== | ==Port-Kommandos== | ||
Line 449: | Line 593: | ||
===portstatsclear=== | ===portstatsclear=== | ||
===portloginshow=== | ===portloginshow=== | ||
Show information about NPIV-ports. | |||
<syntaxhighlight lang=bash> | |||
fcsw1:admin> switchshow | |||
... | |||
Index Port Address Media Speed State Proto | |||
================================================== | |||
... | |||
34 34 0f2200 id N16 Online FC F-Port 1 N Port + 1 NPIV public | |||
... | |||
</syntaxhighlight> | |||
This is a NetApp 8080 with CDOT behind this port as you can see with <i>nodefind <address></i> | |||
<syntaxhighlight lang=bash> | |||
fcsw1:admin> nodefind 0f2200 | |||
Local: | |||
Type Pid COS PortName NodeName SCR | |||
N 0f2200; 3;50:0a:09:82:80:d1:21:ee;50:0a:09:80:80:d1:21:ee; 0x00000000 | |||
PortSymb: [45] "NetApp FC Target Adapter (8324) cdot1-01:0g" | |||
NodeSymb: [38] "NetApp FAS8080 (cdot1-01/cdot1-02)" | |||
Fabric Port Name: 20:22:50:eb:1a:42:f8:45 | |||
Permanent Port Name: 50:0a:09:82:80:d1:21:ee | |||
Device type: Physical Unknown(initiator/target) | |||
Port Index: 34 | |||
Share Area: No | |||
Device Shared in Other AD: No | |||
Redirect: No | |||
Partial: No | |||
LSAN: No | |||
Aliases: | |||
</syntaxhighlight> | |||
Now look with <i>portloginshow <portnumber></i>: | |||
<syntaxhighlight lang=bash> | |||
fcsw1:admin> portloginshow 34 | |||
Type PID World Wide Name credit df_sz cos | |||
===================================================== | |||
fd 0f2201 20:00:00:a0:98:5d:33:82 6 2048 8 scr=0x3 | |||
fe 0f2200 50:0a:09:82:80:d1:21:ee 6 2048 8 scr=0x0 | |||
ff 0f2201 20:00:00:a0:98:5d:33:82 0 0 8 d_id=FFFFFC | |||
ff 0f2200 50:0a:09:82:80:d1:21:ee 0 0 8 d_id=FFFFFC | |||
</syntaxhighlight> | |||
With this information you can find out more about the WWNs: | |||
<syntaxhighlight lang=bash> | |||
fcsw1:admin> nodefind 20:00:00:a0:98:5d:33:82 | |||
Local: | |||
Type Pid COS PortName NodeName SCR | |||
N 0f2201; 3;20:00:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003 | |||
FC4s: FCP | |||
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-01_fc_lif_1" | |||
NodeSymb: [24] "NetApp Vserver cdot1fc" | |||
Fabric Port Name: 20:22:50:eb:1a:42:f8:45 | |||
Permanent Port Name: 50:0a:09:82:80:d1:21:ee | |||
Device type: NPIV Target | |||
Port Index: 34 | |||
Share Area: No | |||
Device Shared in Other AD: No | |||
Redirect: No | |||
Partial: No | |||
LSAN: No | |||
Aliases: cdot1fc_01_lif1 | |||
</syntaxhighlight> | |||
Even the VServer (NodeSymb)! | |||
And with the NodeName you can find all logical interfaces of this svm: | |||
<syntaxhighlight lang=bash> | |||
fcsw1:admin> nodefind 20:04:00:a0:98:5d:33:82 | |||
Local: | |||
Type Pid COS PortName NodeName SCR | |||
N 0f2201; 3;20:00:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003 | |||
FC4s: FCP | |||
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-01_fc_lif_1" | |||
NodeSymb: [24] "NetApp Vserver cdot1fc" | |||
Fabric Port Name: 20:22:50:eb:1a:42:f8:45 | |||
Permanent Port Name: 50:0a:09:82:80:d1:21:ee | |||
Device type: NPIV Target | |||
Port Index: 34 | |||
Share Area: No | |||
Device Shared in Other AD: No | |||
Redirect: No | |||
Partial: No | |||
LSAN: No | |||
Aliases: cdot1fc_01_lif1 | |||
N 0f2301; 3;20:02:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003 | |||
FC4s: FCP | |||
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-02_fc_lif_1" | |||
NodeSymb: [24] "NetApp Vserver cdot1fc" | |||
Fabric Port Name: 20:23:50:eb:1a:42:f8:45 | |||
Permanent Port Name: 50:0a:09:82:80:61:21:e8 | |||
Device type: NPIV Target | |||
Port Index: 35 | |||
Share Area: No | |||
Device Shared in Other AD: No | |||
Redirect: No | |||
Partial: No | |||
LSAN: No | |||
Aliases: cdot1fc_02_lif1 | |||
</syntaxhighlight> | |||
==Zone-Kommandos== | ==Zone-Kommandos== | ||
Line 458: | Line 700: | ||
==Backup der Switchconfig per Script== | ==Backup der Switchconfig per Script== | ||
===Put the backup host ssh-pub-key on the switches=== | ===Put the backup host ssh-pub-key on the switches=== | ||
< | <syntaxhighlight lang=bash> | ||
fcsw1:root> cat >/root/.ssh/authorized_keys <<EOF | fcsw1:root> cat >/root/.ssh/authorized_keys <<EOF | ||
> ssh-dss AAAAB3NzaC1... | > ssh-dss AAAAB3NzaC1... | ||
Line 465: | Line 707: | ||
lF8qsgtTD8cc= root@host | lF8qsgtTD8cc= root@host | ||
> EOF | > EOF | ||
</ | </syntaxhighlight> | ||
===Generate ssh-key on the switches=== | ===Generate ssh-key on the switches=== | ||
< | <syntaxhighlight lang=bash> | ||
fcsw1:root> ssh-keygen | fcsw1:root> ssh-keygen | ||
Generating public/private rsa key pair. | Generating public/private rsa key pair. | ||
Line 484: | Line 726: | ||
| | | | | | ||
+-----------------+ | +-----------------+ | ||
</ | </syntaxhighlight> | ||
===Copy the key to your backup users ~/.ssh/authorized_keys on backup host=== | ===Copy the key to your backup users ~/.ssh/authorized_keys on backup host=== | ||
< | <syntaxhighlight lang=bash> | ||
fcsw1:root> cat /root/.ssh/id_rsa.pub | fcsw1:root> cat /root/.ssh/id_rsa.pub | ||
ssh-rsa AAAAB3NzaC1yc2EAAA... | ssh-rsa AAAAB3NzaC1yc2EAAA... | ||
... | ... | ||
KHnw1T1NaQ== root@fcsw1 | KHnw1T1NaQ== root@fcsw1 | ||
</ | </syntaxhighlight> | ||
===Now the script on the backup host=== | ===Now the script on the backup host=== | ||
< | <syntaxhighlight lang=bash> | ||
# cat /opt/bin/backup_brocade_config | # cat /opt/bin/backup_brocade_config | ||
#!/bin/bash | #!/bin/bash | ||
Line 509: | Line 751: | ||
ssh root@${switch} /fabos/link_sbin/configupload -all -p scp ${BACKUPHOST},${LOCALUSER},${BACKUPDIR}/${switch}_config_${DATE}.txt | ssh root@${switch} /fabos/link_sbin/configupload -all -p scp ${BACKUPHOST},${LOCALUSER},${BACKUPDIR}/${switch}_config_${DATE}.txt | ||
done | done | ||
</ | </syntaxhighlight> | ||
==Script zum parsen einer configupload-Datei== | ==Script zum parsen einer configupload-Datei== | ||
< | <syntaxhighlight lang=awk> | ||
#!/usr/bin/gawk -f | #!/usr/bin/gawk -f | ||
BEGIN{ | BEGIN{ | ||
Line 600: | Line 842: | ||
printf "cfgsave\ncfgenable \"%s\"\n",cfgenabled; | printf "cfgsave\ncfgenable \"%s\"\n",cfgenabled; | ||
} | } | ||
</ | </syntaxhighlight> | ||
=Kommandos: NetApp= | =Kommandos: NetApp= | ||
==fcp topology show : Wo hängt mein Frontend-SAN?== | ==fcp topology show : Wo hängt mein Frontend-SAN?== | ||
< | <syntaxhighlight lang=bash> | ||
fas01> fcp topology show | fas01> fcp topology show | ||
Switches connected on adapter 0d: | Switches connected on adapter 0d: | ||
Line 634: | Line 877: | ||
Switches connected on adapter 1d: | Switches connected on adapter 1d: | ||
None connected. | None connected. | ||
</ | </syntaxhighlight> | ||
==fcp config <port> : Welche WWN habe ich?== | ==fcp config <port> : Welche WWN habe ich?== | ||
< | <syntaxhighlight lang=bash> | ||
fas01> fcp config 1a | fas01> fcp config 1a | ||
1a: ONLINE <ADAPTER UP> PTP Fabric | 1a: ONLINE <ADAPTER UP> PTP Fabric | ||
Line 643: | Line 886: | ||
portname 50:0a:09:83:90:00:29:24 nodename 50:0a:09:80:80:00:29:24 | portname 50:0a:09:83:90:00:29:24 nodename 50:0a:09:80:80:00:29:24 | ||
mediatype auto speed auto | mediatype auto speed auto | ||
</ | </syntaxhighlight> | ||
Kleines Schmankerl ist noch die "host address", die uns zeigt, daß wir auf Switch-ID 01 Port 06 hängen. | Kleines Schmankerl ist noch die "host address", die uns zeigt, daß wir auf Switch-ID 01 Port 06 hängen. | ||
==fcp wwpn-alias (set|show) : Aliasnamen für mehr Klarheit beim Debugging== | ==fcp wwpn-alias (set|show) : Aliasnamen für mehr Klarheit beim Debugging== | ||
< | <syntaxhighlight lang=bash> | ||
fas01> fcp wwpn-alias set sun07_Slot2_Port0 21000024ff363a5a | fas01> fcp wwpn-alias set sun07_Slot2_Port0 21000024ff363a5a | ||
fas01> fcp wwpn-alias show | fas01> fcp wwpn-alias show | ||
Line 653: | Line 896: | ||
---- ----- | ---- ----- | ||
21:00:00:24:ff:36:3a:5a sun07_Slot2_Port0 | 21:00:00:24:ff:36:3a:5a sun07_Slot2_Port0 | ||
</ | </syntaxhighlight> | ||
==sanlun lun show -d <dev> (mit Solaris und ZPool)== | ==sanlun lun show -d <dev> (mit Solaris und ZPool)== | ||
Line 659: | Line 902: | ||
Wenn man wissen möchte, welche NetApp LUNs zu einem ZPool gehören, geht das folgender Maßen: | Wenn man wissen möchte, welche NetApp LUNs zu einem ZPool gehören, geht das folgender Maßen: | ||
< | <syntaxhighlight lang=bash> | ||
# zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}' | # zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}' | ||
</ | </syntaxhighlight> | ||
Beispiel: | Beispiel: | ||
< | <syntaxhighlight lang=bash> | ||
# zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}' | # zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}' | ||
Pool: testpool | Pool: testpool | ||
Line 675: | Line 918: | ||
c5t60A98000433544625634696B76705370d0s0 fas01:/vol/testlun/LUN0 | c5t60A98000433544625634696B76705370d0s0 fas01:/vol/testlun/LUN0 | ||
c5t60A980003830304F392446473844375Ad0 fas02:/vol/testlun/LUN0 | c5t60A980003830304F392446473844375Ad0 fas02:/vol/testlun/LUN0 | ||
</ | </syntaxhighlight> | ||
=Sonstiges= | |||
==Alle WWNs in einem File finden== | |||
Gibt nur die WWNs aus, auch mehrere, wenn mehrere in einer Zeile sind. | |||
<syntaxhighlight lang=awk> | |||
gawk '{line=$0;while(match(line,/[0-9a-f]{2}(:[0-9a-f]{2}){7}/,wwn)){line=substr(line,wwn[0,"start"]+wwn[0,"length"]); print wwn[0];}}' <file> | |||
</syntaxhighlight> | |||
==Some adittions to NetApps sanlun lun show on Solaris== | |||
<syntaxhighlight lang=awk> | |||
# /opt/NTAP/SANToolkit/bin/sanlun lun show | gawk ' | |||
$3 ~ /\/dev\// { | |||
sanlun=$0; | |||
cmd="luxadm display "$3; | |||
while( cmd|getline line ){ | |||
count=split(line,word); | |||
if(line ~ /DEVICE PROPERTIES for disk:/){ | |||
disk=word[count]; | |||
ctrl=""; | |||
dev_addr=""; | |||
svm_ports=""; | |||
delete ports; | |||
delete pri; | |||
delete sec; | |||
delete paths; | |||
delete online; | |||
continue; | |||
} | |||
if(line ~ /Controller/){ | |||
ctrl=word[count]; | |||
continue; | |||
} | |||
if(line ~ /Device Address/){ | |||
dev_addr=word[count]; | |||
gsub(/,.*$/,"",dev_addr); | |||
ports[dev_addr]=1; | |||
pair=ctrl"_"dev_addr; | |||
continue; | |||
} | |||
if(line ~ /Class/){ | |||
class[pair]=word[count]; | |||
if(word[count]=="primary"){ | |||
pri[disk]++; | |||
} else { | |||
sec[disk]++; | |||
} | |||
continue; | |||
} | |||
if(line ~ /State/){ | |||
state[pair]=word[count]; | |||
paths[disk]++; | |||
if(word[count]=="ONLINE"){ | |||
online[disk]++; | |||
} | |||
} | |||
if(line ~ /^$/ && ctrl!=""){ | |||
for(port in ports){ | |||
if(svm_ports==""){ | |||
sep=""; | |||
} else { | |||
sep=","; | |||
} | |||
svm_ports=svm_ports sep port; | |||
} | |||
printf "%s %2d/%2d %2d/%2d %s\n",sanlun,online[disk],paths[disk],pri[disk],sec[disk], svm_ports; | |||
} | |||
} | |||
close(cmd); | |||
next; | |||
} | |||
/^vserver/{ | |||
line=sprintf("%s Online/Total Primary/Secondary Device Addresses\n", $0); | |||
printf line; | |||
gsub(/./,"-",line); | |||
print line; | |||
next; | |||
} | |||
/^[-]+$/{next;} | |||
{print;} | |||
' | |||
</syntaxhighlight> |
Latest revision as of 17:50, 25 November 2021
Fibrechannel Analyse
Kommandos : Solaris
luxadm
luxadm -e port
Gibt die Hardwarepfade der vorhandened Fibrechannelports und deren Status aus:
# luxadm -e port
/devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl CONNECTED
/devices/pci@79,0/pci10de,378@b/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED
/devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:devctl CONNECTED
/devices/pci@79,0/pci10de,376@e/pci1077,143@0,1/fp@0,0:devctl NOT CONNECTED
2 Dualport Karten: /devices/pci@79,0/pci10de,378@b/pci1077,143@0 und ...,1 /devices/pci@79,0/pci10de,376@e/pci1077,143@0 und ...,1
# prtdiag -v | head -1
System Configuration: Sun Microsystems Sun Fire X4440
Aus der Seite Sun x86 Platforms: Matrix of Recognized Device Paths (Doc ID 1277396.1) (Oracle Support Login benötigt):
Sun Fire x4440 (Tucana) PCI: PCIe SLOT0 /pci@0,0/pci10de,375@f/pci1000,3150@0 // with PCI Express 8-Port SAS/SATA HBA PCIe SLOT0 /pci@0,0/pci10de,375@f/ // without PCI Express 8-Port SAS/SATA HBA PCIe SLOT1 /pci@0,0/pci10de,376@e/ PCIe SLOT2 /pci@7c,0/pci10de,377@f/ PCIe SLOT3 /pci@0,0/pci10de,377@a/ PCIe SLOT4 /pci@7c,0/pci10de,376@e/ PCIe SLOT5 /pci@7c,0/pci10de,378@b/ (7c can be renamed something else depending on BIOS/OS version)
Also stecken unsere Karten in Slot 4 und 5.
luxadm -e dump_map <HW_path>
Gibt die Tabelle der bekannten Geräte an einem Port aus
# luxadm -e dump_map /devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 30200 0 202600a0b86e10e4 200600a0b86e10e4 0x0 (Disk device)
1 30600 0 202700a0b86e10e4 200600a0b86e10e4 0x0 (Disk device)
2 10100 0 203400a0b85bb030 200400a0b85bb030 0x0 (Disk device)
3 10500 0 203500a0b85bb030 200400a0b85bb030 0x0 (Disk device)
4 10200 0 202600a0b86e103c 200600a0b86e103c 0x0 (Disk device)
5 11400 0 202700a0b86e103c 200600a0b86e103c 0x0 (Disk device)
6 30100 0 203200a0b85aeb2d 200200a0b85aeb2d 0x0 (Disk device)
7 30500 0 203300a0b85aeb2d 200200a0b85aeb2d 0x0 (Disk device)
8 10800 0 2100001b32902d45 2000001b32902d45 0x1f (Unknown Type,Host Bus Adapter)
Erklärung der interessanten Spalten:
- Port_ID <Switch_ID><Switchport><??>
Es sind also offensichtlich 2 Switches in der Fabric an Port /devices/pci@79,0/pci10de,378@b/pci1077,143@0/fp@0,0:devctl und zwar mit der ID 1 und mit der ID 3. Switch ID 1 Port 1 und 5 : Node WWN 200400a0b85bb030 Port 2 und 14 : Node WWN 200600a0b86e103c Port 8 : Node WWN 2000001b32902d45 (Wir selbst) Switch ID 3 Port 1 und 5 : Node WWN 200200a0b85aeb2d Port 2 und 6 : Node WWN 200600a0b86e10e4 Wir hängen also mit 2 Storages auf dem Switch mit der ID 1 und haben eine Verbindung zu einem Switch mit der ID 3 an dem 2 weitere Storages hängen.
- Node WWN
Wir sehen hier 4 Disk Devices mit jeweils 2 Einträgen (Gleiche Node WWN)
- Port WWN
Dies ist die Port WWN der an den Switch angeschlossenen Geräte (unter 8 finden wir uns selbst). Pro Storage sehen wir hier 2 Port WWNs, also 2 Pfade über unseren einen Hostport.
Daher nachher 4 Pfade (2 Pro Hostport) beim #mpathadm list lu.
- Type
Disk Device: Storage Host Bus Adapter: FC-Karte
luxadm -e rdls <HW_path>
# luxadm -e port 2>/dev/null | awk '{print $1;}' | xargs -n 1 luxadm -e rdls 2>/dev/null
Link Error Status information for loop:/devices/pci@0,0/pci8086,340e@7/pci111d,806e@0/pci111d,806e@2/pci1077,143@0/fp@0,0:devctl
al_pa lnk fail sync loss signal loss sequence err invalid word CRC
30200 2 1 0 0 0 0
30600 2 1 0 0 0 0
10200 1 1 0 0 0 0
11400 2 1 0 0 0 0
10b00 0 0 0 0 0 0
NOTE: These LESB counts are not cleared by a reset, only power cycles.
These counts must be compared to previously read counts.
Link Error Status information for loop:/devices/pci@0,0/pci8086,340e@7/pci111d,806e@0/pci111d,806e@2/pci1077,143@0,1/fp@0,0:devctl
al_pa lnk fail sync loss signal loss sequence err invalid word CRC
0 0 0 0 0 0 0
NOTE: These LESB counts are not cleared by a reset, only power cycles.
These counts must be compared to previously read counts.
luxadm probe
Auflistung aller erkannten Fibrechanneldevices
#> luxadm probe
Found Fibre Channel device(s):
Node WWN:200600a0b86e10e4 Device Type:Disk device
Logical Path:/dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2
...
luxadm display <Diskpath|WWN>
#> luxadm display /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2
Vendor: SUN
Product ID: STK6580_6780
Revision: 0784
Serial Num: SP01068442
Unformatted capacity: 204800.000 MBytes
Write Cache: Enabled
Read Cache: Enabled
Minimum prefetch: 0x300
Maximum prefetch: 0x0
Device Type: Disk device
Path(s):
/dev/rdsk/c8t600A0B80006E10E40000DC1C52E8B751d0s2
/devices/scsi_vhci/disk@g600a0b80006e10e40000dc1c52e8b751:c,raw
Controller /dev/cfg/c4
Device Address 202600a0b86e10e4,5
Host controller port WWN 2100001b328a417f
Class primary
State ONLINE
Controller /dev/cfg/c4
Device Address 202700a0b86e10e4,5
Host controller port WWN 2100001b328a417f
Class secondary
State STANDBY
Controller /dev/cfg/c6
Device Address 201600a0b86e10e4,5
Host controller port WWN 2100001b32904445
Class primary
State ONLINE
Controller /dev/cfg/c6
Device Address 201700a0b86e10e4,5
Host controller port WWN 2100001b32904445
Class secondary
State STANDBY
- Vendor: SUN
Hersteller
- Product ID: STK6580_6780
Also ein StorageTek 6580/6780
- Revision: 0784
Grobe Firmwarepeilung (Firmware Version: 07.84.47.10)
Siehe hier #lsscs list array <array_name>
- Serial Num: SP01068442
Praktisch, wenn man mit NetApps arbeitet, um die LUNs zuzuordnen.
- Unformatted capacity: 204800.000 MBytes
Immer gut zu wissen
- Write Cache: Enabled
Die Batterie im Storage sollte also OK sein ;-)
- Path(s):
Rawdevicepath Hardwaredevicepath Jetzt folgen immer pro Pfad zu diesem Device ein Block aus Controller (siehe unten) Device Address <Port WWN vom Device>,<LUN ID> Class <primary|secondary> (siehe unten) State <Online|Standby|Oflline>
Zuweisung Controller zum FC-Port über:
# ls -al /dev/cfg/c6
lrwxrwxrwx 1 root root 60 Sep 3 2009 /dev/cfg/c6 -> ../../devices/pci@79,0/pci10de,376@e/pci1077,143@0/fp@0,0:fc
Man sieht den Hardwarepfad von #luxadm -e port
Class:
Via ALUA (Asymmetric Logical Unit Access) teilt das Device dem Host mit, über welche Pfade der Host primär auf die LUN zugreifen soll.
fcinfo
fcinfo hba-port
Gibt ein paar Infos über Hersteller, Modell, Firmware, Port und Node WWN, Current Speed, ... aus
#> fcinfo hba-port
HBA Port WWN: 2100001b328a417f
OS Device Name: /dev/cfg/c4
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.06.00
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01; EFI: 2.00;
Serial Number: 0402R00-0918701860
Driver Name: qlc
Driver Version: 20110825-3.06
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b328a417f
HBA Port WWN: 2101001b32aa417f
OS Device Name: /dev/cfg/c5
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.06.00
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01; EFI: 2.00;
Serial Number: 0402R00-0918701860
Driver Name: qlc
Driver Version: 20110825-3.06
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2001001b32aa417f
HBA Port WWN: 2100001b32904445
OS Device Name: /dev/cfg/c6
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.06.00
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01; EFI: 2.00;
Serial Number: 0402R00-0918701887
Driver Name: qlc
Driver Version: 20110825-3.06
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b32904445
HBA Port WWN: 2101001b32b04445
OS Device Name: /dev/cfg/c7
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.06.00
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01; EFI: 2.00;
Serial Number: 0402R00-0918701887
Driver Name: qlc
Driver Version: 20110825-3.06
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2001001b32b04445
fcinfo remote-port --port <HBA Port WWN> --linkstat
# fcinfo remote-port --port 2100001b32904445 --linkstat
Remote Port WWN: 201600a0b86e103c
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200600a0b86e103c
Link Error Statistics:
Link Failure Count: 3
Loss of Sync Count: 3
Loss of Signal Count: 2
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 201700a0b86e103c
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200600a0b86e103c
Link Error Statistics:
Link Failure Count: 4
Loss of Sync Count: 261
Loss of Signal Count: 4
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 202200a0b85aeb2d
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200200a0b85aeb2d
Link Error Statistics:
Link Failure Count: 2
Loss of Sync Count: 1
Loss of Signal Count: 2
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 202300a0b85aeb2d
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200200a0b85aeb2d
Link Error Statistics:
Link Failure Count: 2
Loss of Sync Count: 1
Loss of Signal Count: 2
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 201600a0b86e10e4
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200600a0b86e10e4
Link Error Statistics:
Link Failure Count: 3
Loss of Sync Count: 1
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 201700a0b86e10e4
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200600a0b86e10e4
Link Error Statistics:
Link Failure Count: 3
Loss of Sync Count: 1
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 202400a0b85bb030
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200400a0b85bb030
Link Error Statistics:
Link Failure Count: 2
Loss of Sync Count: 1
Loss of Signal Count: 2
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
Remote Port WWN: 202500a0b85bb030
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 200400a0b85bb030
Link Error Statistics:
Link Failure Count: 2
Loss of Sync Count: 1
Loss of Signal Count: 3
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
fcinfo remote-port --port <HBA Port WWN> --scsi-target
# fcinfo hba-port | grep HBA
HBA Port WWN: 21000024ff3cf472
HBA Port WWN: 21000024ff3cf473
HBA Port WWN: 21000024ff3cf454
HBA Port WWN: 21000024ff3cf455
# fcinfo remote-port --port 21000024ff3cf472 --scsi-target
Remote Port WWN: 20110002ac0059ce
Active FC4 Types: SCSI
SCSI Target: yes
Node WWN: 2ff70002ac0059ce
LUN: 0
Vendor: 3PARdata
Product: VV
OS Device Name: /dev/rdsk/c6t60002AC00000000000000002000059CEd0s2
LUN: 1
Vendor: 3PARdata
Product: VV
OS Device Name: /dev/rdsk/c6t60002AC00000000000000003000059CEd0s2
LUN: 2
Vendor: 3PARdata
Product: VV
OS Device Name: /dev/rdsk/c6t60002AC00000000000000004000059CEd0s2
...
fcinfo lu -v <device>
# fcinfo lu -v /dev/rdsk/c0t60030D90D9DD1A059655804D4A5EAD2Ed0s2
OS Device Name: /dev/rdsk/c0t60030D90D9DD1A059655804D4A5EAD2Ed0s2
HBA Port WWN: 2100000e1ed89451
Controller: /dev/cfg/c4
Remote Port WWN: 2100f4e9d4564d21
LUN: 11
State: active/optimized
Remote Port WWN: 2100f4e9d4564c97
LUN: 11
State: active/non-optimized
HBA Port WWN: 2100000e1ed89450
Controller: /dev/cfg/c3
Remote Port WWN: 2100f4e9d4564d44
LUN: 11
State: active/optimized
Remote Port WWN: 2100f4e9d4564c1c
LUN: 11
State: active/non-optimized
Vendor: DataCore
Product: Virtual Disk
Device Type: Disk Device
Unformatted capacity: 204800.000 MBytes
mpathadm
mpathadm list lu
cfgadm
cfgadm -al -o show_FCP_dev [<controller>]
# cfgadm -al -o show_FCP_dev | grep unusable
c8::21000024ff2d49a2,0 disk connected configured unusable
c8::21000024ff2d49a2,1 disk connected configured unusable
c8::21000024ff2d49a2,2 disk connected configured unusable
c8::21000024ff2d49a2,3 disk connected configured unusable
c8::21000024ff2d49a2,4 disk connected configured unusable
c8::21000024ff2d49a2,5 disk connected configured unusable
c8::21000024ff2d49a2,6 disk connected configured unusable
c8::21000024ff2d49a2,7 disk connected configured unusable
c8::21000024ff2d49a2,8 disk connected configured unusable
c8::21000024ff2d49a2,9 disk connected configured unusable
c8::21000024ff2d49a2,10 disk connected configured unusable
c9::203400a0b839c421,31 disk connected configured unusable
c9::203400a0b84913d2,31 disk connected configured unusable
c9::203500a0b839c421,31 disk connected configured unusable
c9::203500a0b84913d2,31 disk connected configured unusable
cfgadm -c unconfigure -o unusable_SCSI_LUN <unusable device>
# cfgadm -c unconfigure -o unusable_SCSI_LUN c8::21000024ff2d49a2
Alle aufräumen:
# cfgadm -alo show_SCSI_LUN | nawk '$NF=="unusable"{gsub(/,[0-9]+$/,"",$1);print $1}' | sort -u | xargs -n 1 cfgadm -c unconfigure -o unusable_SCSI_LUN
cfgadm -o force_update -c configure <controller>
Rescan LUNs. Be careful! Does a forcelip!
# cfgadm -o force_update -c configure c10
prtconf -Da <device>
# prtconf -Da /dev/cfg/c3
i86pc (driver name: rootnex)
pci, instance #0 (driver name: npe)
pci8086,3410, instance #5 (driver name: pcieb)
pci111d,806e, instance #12 (driver name: pcieb)
pci111d,806e, instance #13 (driver name: pcieb)
pci1077,170, instance #0 (driver name: qlc) <---
fp, instance #0 (driver name: fp)
LUN masking (access LUNs of a storage)
Nov 6 13:44:59 server01 Corrupt label; wrong magic number
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@380/pci@1/pci@0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w204300a096691217,7 (ssd7):
Nov 6 13:44:59 server01 Corrupt label; wrong magic number
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@380/pci@1/pci@0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w204300a096691217,7 (ssd7):
Nov 6 13:44:59 server01 Corrupt label; wrong magic number
Nov 6 13:44:59 server01 cmlb: WARNING: /pci@300/pci@1/pci@0/pci@4/SUNW,qlc@0/fp@0,0/ssd@w203300a096691217,7 (ssd2):
Nov 6 13:44:59 server01 Corrupt label; wrong magic number
...
# cat /etc/driver/drv/fp.conf
mpxio-disable="no";
pwwn-lun-blacklist=
"203200a096691265,7",
"203300a096691265,7",
"204200a096691265,7",
"204300a096691265,7",
"203200a096691217,7",
"203300a096691217,7",
"204200a096691217,7",
"204300a096691217,7";
# reboot -- -r
...
Boot device: /pci@300/pci@1/pci@0/pci@2/scsi@0/disk@p0 File and args: -r
SunOS Release 5.11 Version 11.3 64-bit
Copyright (c) 1983, 2015, Oracle and/or its affiliates. All rights reserved.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 203300a096691217 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 203200a096691217 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 203300a096691265 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 203200a096691265 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 204300a096691217 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 204200a096691217 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 204300a096691265 is masked due to black listing.
/pseudo/fcp@0 (fcp0):
LUN 7 of port 204200a096691265 is masked due to black listing.
Configuring devices.
Kommandos : Common Array Manager
lsscs
Ist unter Solaris in /opt/SUNWsefms/bin
lsscs list array
lsscs list array <array_name>
lsscs list -a <array_name> fcport
Kommandos : Brocade
Switch-Kommandos
switchshow
san-sw_11:admin> switchshow
switchName: san-sw_11
switchType: 71.2
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:33:df:43:5a
zoning: ON (Fabric1)
switchBeacon: OFF
Index Port Address Media Speed State Proto
==============================================
0 0 010000 id N8 No_Light FC
1 1 010100 id N8 Online FC E-Port 10:00:00:05:33:df:bd:b9 "san-sw_21" (downstream)
2 2 010200 id N8 Online FC F-Port 21:00:00:24:ff:05:74:e4
3 3 010300 id N8 Online FC F-Port 50:0a:09:81:8d:32:5d:c4
4 4 010400 id N8 No_Light FC
5 5 010500 id N8 Online FC E-Port 10:00:00:05:33:df:bd:b9 "san-sw_21"
6 6 010600 id N4 Online FC F-Port 20:06:00:a0:b8:32:38:17
7 7 010700 id N4 Online FC F-Port 20:07:00:a0:b8:32:38:17
8 8 010800 id N4 Online FC F-Port 21:00:00:1b:32:91:4c:ed
9 9 010900 id N4 Online FC F-Port 21:00:00:1b:32:98:05:1a
10 10 010a00 id N8 Online FC F-Port 21:00:00:24:ff:4a:d3:bc
11 11 010b00 id N8 No_Light FC
12 12 010c00 id N8 No_Light FC
13 13 010d00 id N8 No_Light FC
14 14 010e00 id N8 No_Light FC
15 15 010f00 id N8 No_Light FC
16 16 011000 -- N8 No_Module FC (No POD License) Disabled
17 17 011100 -- N8 No_Module FC (No POD License) Disabled
18 18 011200 -- N8 No_Module FC (No POD License) Disabled
19 19 011300 -- N8 No_Module FC (No POD License) Disabled
20 20 011400 -- N8 No_Module FC (No POD License) Disabled
21 21 011500 -- N8 No_Module FC (No POD License) Disabled
22 22 011600 -- N8 No_Module FC (No POD License) Disabled
23 23 011700 -- N8 No_Module FC (No POD License) Disabled
Was sagt uns das?
- Dies ist der "Principal" (alle andere sind "Subordinate") der Fabric "Fabric1" (switchRole:, zoning:)
- Der Switch ist gezoned (zoning:)
- SwitchID ist "fffc01"
- Es ist ein 24-Port Switch
- Es gibt einen doppelten ISL (InterSwitchLink) zu einem anderen Switch E-Port (san-sw_21)
- 6 Ports sind mit SFPs bestückt, aber nicht belegt (0,4,11-15)
- 8 Ports haben keine Lizenz und auch kein SFP (No_Module)
- 9 Ports sind belegt
fabricshow
san-sw_11:root> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
1: fffc01 10:00:00:05:33:df:43:5a 192.168.1.117 0.0.0.0 >"san-sw_11"
2: fffc02 10:00:00:05:33:df:bd:b9 192.168.1.119 0.0.0.0 "san-sw_21"
The Fabric has 2 switches
islshow
rz1_fab2_11:admin> islshow
1: 1-> 0 10:00:00:05:1e:0d:5e:96 12 bc1_sl4_fab2_12 sp: 4.000G bw: 4.000G
2: 2-> 0 10:00:00:05:1e:0d:e2:53 13 bc2_sl4_fab2_13 sp: 4.000G bw: 4.000G
3: 3-> 0 10:00:00:05:1e:b3:71:bf 14 bc3_sl4_fab2_14 sp: 4.000G bw: 4.000G
4: 5-> 17 10:00:00:05:1e:0d:5e:96 12 bc1_sl4_fab2_12 sp: 4.000G bw: 4.000G
5: 6-> 17 10:00:00:05:1e:0d:e2:53 13 bc2_sl4_fab2_13 sp: 4.000G bw: 4.000G
6: 7-> 17 10:00:00:05:1e:b3:71:bf 14 bc3_sl4_fab2_14 sp: 4.000G bw: 4.000G
7: 10-> 8 10:00:50:eb:1a:45:71:96 15 rz-6510-fab2-15 sp: 4.000G bw: 4.000G
8: 18-> 0 10:00:50:eb:1a:45:71:96 15 rz-6510-fab2-15 sp: 4.000G bw: 4.000G
Port-Kommandos
porterrshow
portstatsshow
portstatsclear
portloginshow
Show information about NPIV-ports.
fcsw1:admin> switchshow
...
Index Port Address Media Speed State Proto
==================================================
...
34 34 0f2200 id N16 Online FC F-Port 1 N Port + 1 NPIV public
...
This is a NetApp 8080 with CDOT behind this port as you can see with nodefind <address>
fcsw1:admin> nodefind 0f2200
Local:
Type Pid COS PortName NodeName SCR
N 0f2200; 3;50:0a:09:82:80:d1:21:ee;50:0a:09:80:80:d1:21:ee; 0x00000000
PortSymb: [45] "NetApp FC Target Adapter (8324) cdot1-01:0g"
NodeSymb: [38] "NetApp FAS8080 (cdot1-01/cdot1-02)"
Fabric Port Name: 20:22:50:eb:1a:42:f8:45
Permanent Port Name: 50:0a:09:82:80:d1:21:ee
Device type: Physical Unknown(initiator/target)
Port Index: 34
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Aliases:
Now look with portloginshow <portnumber>:
fcsw1:admin> portloginshow 34
Type PID World Wide Name credit df_sz cos
=====================================================
fd 0f2201 20:00:00:a0:98:5d:33:82 6 2048 8 scr=0x3
fe 0f2200 50:0a:09:82:80:d1:21:ee 6 2048 8 scr=0x0
ff 0f2201 20:00:00:a0:98:5d:33:82 0 0 8 d_id=FFFFFC
ff 0f2200 50:0a:09:82:80:d1:21:ee 0 0 8 d_id=FFFFFC
With this information you can find out more about the WWNs:
fcsw1:admin> nodefind 20:00:00:a0:98:5d:33:82
Local:
Type Pid COS PortName NodeName SCR
N 0f2201; 3;20:00:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003
FC4s: FCP
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-01_fc_lif_1"
NodeSymb: [24] "NetApp Vserver cdot1fc"
Fabric Port Name: 20:22:50:eb:1a:42:f8:45
Permanent Port Name: 50:0a:09:82:80:d1:21:ee
Device type: NPIV Target
Port Index: 34
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Aliases: cdot1fc_01_lif1
Even the VServer (NodeSymb)!
And with the NodeName you can find all logical interfaces of this svm:
fcsw1:admin> nodefind 20:04:00:a0:98:5d:33:82
Local:
Type Pid COS PortName NodeName SCR
N 0f2201; 3;20:00:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003
FC4s: FCP
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-01_fc_lif_1"
NodeSymb: [24] "NetApp Vserver cdot1fc"
Fabric Port Name: 20:22:50:eb:1a:42:f8:45
Permanent Port Name: 50:0a:09:82:80:d1:21:ee
Device type: NPIV Target
Port Index: 34
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Aliases: cdot1fc_01_lif1
N 0f2301; 3;20:02:00:a0:98:5d:33:82;20:04:00:a0:98:5d:33:82; 0x00000003
FC4s: FCP
PortSymb: [58] "NetApp FC Target Port (8324) cdot1fc:cdot1-02_fc_lif_1"
NodeSymb: [24] "NetApp Vserver cdot1fc"
Fabric Port Name: 20:23:50:eb:1a:42:f8:45
Permanent Port Name: 50:0a:09:82:80:61:21:e8
Device type: NPIV Target
Port Index: 35
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Aliases: cdot1fc_02_lif1
Zone-Kommandos
zoneshow
alicreate
alishow
Backup der Switchconfig per Script
Put the backup host ssh-pub-key on the switches
fcsw1:root> cat >/root/.ssh/authorized_keys <<EOF
> ssh-dss AAAAB3NzaC1...
...
...
lF8qsgtTD8cc= root@host
> EOF
Generate ssh-key on the switches
fcsw1:root> ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
2a:23:33:...:69:bc:25:a5:f9 root@fcsw1
The key's randomart image is:
+--[ RSA 2048]----+
| |
| ... |
| |
+-----------------+
Copy the key to your backup users ~/.ssh/authorized_keys on backup host
fcsw1:root> cat /root/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAA...
...
KHnw1T1NaQ== root@fcsw1
Now the script on the backup host
# cat /opt/bin/backup_brocade_config
#!/bin/bash
SWITCHES="
172.30.40.50
172.30.40.51
"
LOCALUSER="backupuser"
BACKUPDIR="brocade_backup"
BACKUPHOST="172.30.40.10"
DATE="$(date '+%Y%m%d-%H%M%S')"
for switch in ${SWITCHES} ; do
printf "Backing up ${switch} to ~${LOCALUSER}/${BACKUPDIR}/${switch}_config_${date}.txt... "
ssh root@${switch} /fabos/link_sbin/configupload -all -p scp ${BACKUPHOST},${LOCALUSER},${BACKUPDIR}/${switch}_config_${DATE}.txt
done
Script zum parsen einer configupload-Datei
#!/usr/bin/gawk -f
BEGIN{
vendor["001438"]="Hewlett-Packard";
vendor["00a098"]="NetApp";
vendor["0024ff"]="Qlogic";
vendor["001b32"]="Qlogic";
vendor["0000c9"]="Emulex";
vendor["00e002"]="CROSSROADS SYSTEMS, INC.";
}
/\[Zoning\]/,/^$/ {
if(/^cfg./){
split($0,cfgparts,":");
gsub(/^cfg./,"",cfgparts[1]);
cfg[cfgparts[1]]=cfgparts[2];
}
else if(/^zone./) {
zonename=$0;
gsub(/:.*$/,"",zonename);
gsub(/^zone./,"",zonename);
zonemembers=$0;
gsub(/^[^:]*:/,"",zonemembers);
zone[zonename]=zonemembers;
}
else if(/^alias./) {
aliasname=$0;
gsub(/:.*$/,"",aliasname);
gsub(/^alias./,"",aliasname);
aliasmembers=$0;
gsub(/^[^:]*:/,"",aliasmembers);
alias[aliasname]=aliasmembers;
if(length(aliasname)>longestalias){
longestalias=length(aliasname);
}
}
else if(/^enable:/) {
cfgenabled=$0;
gsub(/^enable:/,"",cfgenabled);
}
}
END {
print "Config:",cfgenabled;
split(cfg[cfgenabled],active_zones,";");
for(active_zone in active_zones) {
split(zone[active_zones[active_zone]],zone_members,";");
asort(zone_members);
print "Zone",active_zones[active_zone],"(",length(zone_members),"Members ):";
for(zone_member in zone_members){
member=zone_members[zone_member];
if(alias[member]!=""){
member=alias[member];
}
WWN=member;
gsub(/:/,"",WWN);
if(WWN ~ /^5/){start=2;}else{start=5;}
vendor_id=substr(WWN,start,6);
printf " Member: %s\t",member;
if(alias[zone_members[zone_member]]!=""){
format=sprintf("%%s%%%ds\t",longestalias-length(zone_members[zone_member]));
printf format,zone_members[zone_member]," ";
}
printf "%s\n",vendor[vendor_id];
}
}
printf "\n\n\nCreate config:\n-------------------------------------------------\n";
printf "cfgdelete \"%s\"\n",cfgenabled;
for(active_zone in active_zones) {
split(zone[active_zones[active_zone]],zone_members,";");
asort(zone_members);
for(zone_member in zone_members){
member=zone_members[zone_member];
if(alias[member]!=""){
printf "alicreate \"%s\",\"%s\"\n",member,alias[member];
alias[member]="";
}
}
printf "zonecreate \"%s\",\"%s\"\n",active_zones[active_zone],zone[active_zones[active_zone]];
if(!secondelement){
secondelement=1;
printf "cfgcreate";
} else {
printf "cfgadd ";
}
printf " \"%s\",\"%s\"\n",cfgenabled,active_zones[active_zone];
}
printf "cfgsave\ncfgenable \"%s\"\n",cfgenabled;
}
Kommandos: NetApp
fcp topology show : Wo hängt mein Frontend-SAN?
fas01> fcp topology show
Switches connected on adapter 0d:
None connected.
Switches connected on adapter 0c:
None connected.
Switches connected on adapter 1a:
Switch Name: fcsw01
Switch Vendor: Brocade Communications, Inc.
Switch Release: v6.4.2a
Switch Domain: 1
Switch WWN: 10:00:00:05:33:c6:1e:6c
Port Count: 24
Switches connected on adapter 1b:
Switch Name: fcsw02
Switch Vendor: Brocade Communications, Inc.
Switch Release: v6.4.2a
Switch Domain: 1
Switch WWN: 10:00:00:05:33:c7:5e:d2
Port Count: 24
Switches connected on adapter 1c:
None connected.
Switches connected on adapter 1d:
None connected.
fcp config <port> : Welche WWN habe ich?
fas01> fcp config 1a
1a: ONLINE <ADAPTER UP> PTP Fabric
host address 010600
portname 50:0a:09:83:90:00:29:24 nodename 50:0a:09:80:80:00:29:24
mediatype auto speed auto
Kleines Schmankerl ist noch die "host address", die uns zeigt, daß wir auf Switch-ID 01 Port 06 hängen.
fcp wwpn-alias (set|show) : Aliasnamen für mehr Klarheit beim Debugging
fas01> fcp wwpn-alias set sun07_Slot2_Port0 21000024ff363a5a
fas01> fcp wwpn-alias show
WWPN Alias
---- -----
21:00:00:24:ff:36:3a:5a sun07_Slot2_Port0
sanlun lun show -d <dev> (mit Solaris und ZPool)
Wenn man wissen möchte, welche NetApp LUNs zu einem ZPool gehören, geht das folgender Maßen:
# zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}'
Beispiel:
# zpool status | nawk '/c[0-9]t/{dev=$1;gsub(/s[0-9]+$/,"",$1);command="/opt/NTAP/SANToolkit/bin/sanlun lun show -d /dev/rdsk/"$1"s2";command | getline; command | getline; print dev,$1$2;next;}{print;}'
Pool: testpool
Status: ONLINE
scan: resilvered 11,0G in 0h1m with 0 errors on Thu Oct 2 09:41:39 2014
config:
NAME STATE READ WRITE CKSUM
testpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
c5t60A98000433544625634696B76705370d0s0 fas01:/vol/testlun/LUN0
c5t60A980003830304F392446473844375Ad0 fas02:/vol/testlun/LUN0
Sonstiges
Alle WWNs in einem File finden
Gibt nur die WWNs aus, auch mehrere, wenn mehrere in einer Zeile sind.
gawk '{line=$0;while(match(line,/[0-9a-f]{2}(:[0-9a-f]{2}){7}/,wwn)){line=substr(line,wwn[0,"start"]+wwn[0,"length"]); print wwn[0];}}' <file>
Some adittions to NetApps sanlun lun show on Solaris
# /opt/NTAP/SANToolkit/bin/sanlun lun show | gawk '
$3 ~ /\/dev\// {
sanlun=$0;
cmd="luxadm display "$3;
while( cmd|getline line ){
count=split(line,word);
if(line ~ /DEVICE PROPERTIES for disk:/){
disk=word[count];
ctrl="";
dev_addr="";
svm_ports="";
delete ports;
delete pri;
delete sec;
delete paths;
delete online;
continue;
}
if(line ~ /Controller/){
ctrl=word[count];
continue;
}
if(line ~ /Device Address/){
dev_addr=word[count];
gsub(/,.*$/,"",dev_addr);
ports[dev_addr]=1;
pair=ctrl"_"dev_addr;
continue;
}
if(line ~ /Class/){
class[pair]=word[count];
if(word[count]=="primary"){
pri[disk]++;
} else {
sec[disk]++;
}
continue;
}
if(line ~ /State/){
state[pair]=word[count];
paths[disk]++;
if(word[count]=="ONLINE"){
online[disk]++;
}
}
if(line ~ /^$/ && ctrl!=""){
for(port in ports){
if(svm_ports==""){
sep="";
} else {
sep=",";
}
svm_ports=svm_ports sep port;
}
printf "%s %2d/%2d %2d/%2d %s\n",sanlun,online[disk],paths[disk],pri[disk],sec[disk], svm_ports;
}
}
close(cmd);
next;
}
/^vserver/{
line=sprintf("%s Online/Total Primary/Secondary Device Addresses\n", $0);
printf line;
gsub(/./,"-",line);
print line;
next;
}
/^[-]+$/{next;}
{print;}
'