ISCSI Initiator with Linux: Difference between revisions

From Lolly's Wiki
Jump to navigationJump to search
m (Text replacement - "</source" to "</syntaxhighlight")
m (Text replacement - "<source" to "<syntaxhighlight")
Line 6: Line 6:
=== LACP-bonding for the frontend ===
=== LACP-bonding for the frontend ===
==== /etc/netplan/bond0.yaml ====
==== /etc/netplan/bond0.yaml ====
<source lang=yaml>
<syntaxhighlight lang=yaml>
network:
network:
   version: 2
   version: 2
Line 41: Line 41:
=== Two dedicated 10GE interfaces with jumbo-frames for the backend ===  
=== Two dedicated 10GE interfaces with jumbo-frames for the backend ===  
==== /etc/netplan/iscsi.yaml ====
==== /etc/netplan/iscsi.yaml ====
<source lang=yaml>
<syntaxhighlight lang=yaml>
network:
network:
   version: 2
   version: 2
Line 67: Line 67:


=== Apply the parameters and check settings ===
=== Apply the parameters and check settings ===
<source lang=bash>
<syntaxhighlight lang=bash>
# netplan apply
# netplan apply
# ip a sh iscsi0
# ip a sh iscsi0
Line 98: Line 98:


=== Check if all components are configured right for jumbo-frames ===
=== Check if all components are configured right for jumbo-frames ===
<source lang=bash>
<syntaxhighlight lang=bash>
# ping -c 3 -M do -s 8972 -I iscsi0 10.250.71.1
# ping -c 3 -M do -s 8972 -I iscsi0 10.250.71.1
PING 10.250.71.1 (10.250.71.1) from 10.250.71.32 iscsi0: 8972(9000) bytes of data.
PING 10.250.71.1 (10.250.71.1) from 10.250.71.32 iscsi0: 8972(9000) bytes of data.
Line 122: Line 122:
=== Setup initiator iqn ===
=== Setup initiator iqn ===
Setup a new iqn:
Setup a new iqn:
<source>
<syntaxhighlight>
# /sbin/iscsi-iname
# /sbin/iscsi-iname
</syntaxhighlight>
</syntaxhighlight>
Line 129: Line 129:


==== /etc/iscsi/initiatorname.iscsi ====
==== /etc/iscsi/initiatorname.iscsi ====
<source>
<syntaxhighlight>
## DO NOT EDIT OR REMOVE THIS FILE!
## DO NOT EDIT OR REMOVE THIS FILE!
## If you remove this file, the iSCSI daemon will not start.
## If you remove this file, the iSCSI daemon will not start.
Line 139: Line 139:


=== Setup iSCSI-Interfaces ===
=== Setup iSCSI-Interfaces ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m iface -I iscsi0 -o new
# iscsiadm -m iface -I iscsi0 -o new
# iscsiadm -m iface -I iscsi0 --op=update -n iface.net_ifacename -v iscsi0
# iscsiadm -m iface -I iscsi0 --op=update -n iface.net_ifacename -v iscsi0
Line 152: Line 152:
# END RECORD
# END RECORD
</syntaxhighlight>
</syntaxhighlight>
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m iface -I iscsi1 -o new
# iscsiadm -m iface -I iscsi1 -o new
# iscsiadm -m iface -I iscsi1 --op=update -n iface.net_ifacename -v iscsi1
# iscsiadm -m iface -I iscsi1 --op=update -n iface.net_ifacename -v iscsi1
Line 167: Line 167:


=== Discover LUNs that are offered by the storage ===
=== Discover LUNs that are offered by the storage ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m discovery -t st -p 10.250.71.1
# iscsiadm -m discovery -t st -p 10.250.71.1
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
Line 178: Line 178:
10.250.71.1:3260,1 iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1
10.250.71.1:3260,1 iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1
</syntaxhighlight>
</syntaxhighlight>
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m discovery -t st -p 10.251.71.1
# iscsiadm -m discovery -t st -p 10.251.71.1
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
Line 192: Line 192:


=== Login to discovered LUNs ===
=== Login to discovered LUNs ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m node -T  iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 --login
# iscsiadm -m node -T  iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 --login
Logging in to [iface: iscsi0, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1, portal: 10.250.71.1,3260] (multiple)
Logging in to [iface: iscsi0, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1, portal: 10.250.71.1,3260] (multiple)
Line 203: Line 203:


=== Take a look at the running session ===
=== Take a look at the running session ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m session -P 1
# iscsiadm -m session -P 1
Target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 (non-flash)
Target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 (non-flash)
Line 241: Line 241:


=== Check the session is still ok after a restart of iscsid.service ===
=== Check the session is still ok after a restart of iscsid.service ===
<source lang=bash>
<syntaxhighlight lang=bash>
# systemctl status iscsid.service
# systemctl status iscsid.service
# systemctl restart iscsid.service
# systemctl restart iscsid.service
Line 253: Line 253:


=== Enable automatic startup of connection ===
=== Enable automatic startup of connection ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m node --op=update -n node.conn[0].startup -v automatic
# iscsiadm -m node --op=update -n node.conn[0].startup -v automatic
# iscsiadm -m node --op=update -n node.startup -v automatic
# iscsiadm -m node --op=update -n node.startup -v automatic
</syntaxhighlight>
</syntaxhighlight>
=== Check timeout parameter ===
=== Check timeout parameter ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 |  grep node.session.timeo.replacement_timeout
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 |  grep node.session.timeo.replacement_timeout
node.session.timeo.replacement_timeout = 120
node.session.timeo.replacement_timeout = 120
Line 266: Line 266:
</syntaxhighlight>
</syntaxhighlight>
=== Adjust timeout values to your needs ===
=== Adjust timeout values to your needs ===
<source lang=bash>
<syntaxhighlight lang=bash>
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10
Line 273: Line 273:
== Configure multipathing ==
== Configure multipathing ==
=== List SCSI devices ===
=== List SCSI devices ===
<source lang=bash>
<syntaxhighlight lang=bash>
# lsscsi
# lsscsi
[0:2:0:0]    disk    DELL    PERC H730 Mini  4.30  /dev/sda  <--- this is our internal disk / raid
[0:2:0:0]    disk    DELL    PERC H730 Mini  4.30  /dev/sda  <--- this is our internal disk / raid
Line 282: Line 282:


=== Get wwids for devices ===
=== Get wwids for devices ===
<source lang=bash>
<syntaxhighlight lang=bash>
# /lib/udev/scsi_id --whitelisted --device=/dev/sda
# /lib/udev/scsi_id --whitelisted --device=/dev/sda
361866da075bdee001f9a2ede2705b9ba
361866da075bdee001f9a2ede2705b9ba
Line 293: Line 293:
=== Setup multipathing configuration ===
=== Setup multipathing configuration ===
==== /etc/multipath.conf ====
==== /etc/multipath.conf ====
<source>
<syntaxhighlight>
defaults {
defaults {
     user_friendly_names yes
     user_friendly_names yes
Line 334: Line 334:
device mapper, path checkers ...).
device mapper, path checkers ...).
</pre>
</pre>
<source lang=bash>
<syntaxhighlight lang=bash>
# multipath -r
# multipath -r
</syntaxhighlight>
</syntaxhighlight>
<source lang=bash>
<syntaxhighlight lang=bash>
# multipath -ll
# multipath -ll
data (3628dee5100f846b5243be07d00000004) dm-0 HUAWEI,XSG1
data (3628dee5100f846b5243be07d00000004) dm-0 HUAWEI,XSG1
Line 346: Line 346:
</syntaxhighlight>
</syntaxhighlight>


<source lang=bash>
<syntaxhighlight lang=bash>
# ls -al /dev/mapper/data
# ls -al /dev/mapper/data
lrwxrwxrwx 1 root root 7 Okt 18 14:46 /dev/mapper/data -> ../dm-0
lrwxrwxrwx 1 root root 7 Okt 18 14:46 /dev/mapper/data -> ../dm-0
Line 352: Line 352:


=== Create a systemd unit to mount it at the right time during boot ===
=== Create a systemd unit to mount it at the right time during boot ===
<source lang=bash>
<syntaxhighlight lang=bash>
# systemctl edit --force --full data.mount
# systemctl edit --force --full data.mount
</syntaxhighlight>
</syntaxhighlight>


==== /etc/systemd/system/data.mount ====
==== /etc/systemd/system/data.mount ====
<source lang=inifile>
<syntaxhighlight lang=inifile>
[Unit]
[Unit]
Before=remote-fs.target
Before=remote-fs.target
Line 372: Line 372:


=== Enable your unit on next reboot and start it for now ===
=== Enable your unit on next reboot and start it for now ===
<source lang=bash>
<syntaxhighlight lang=bash>
# systemctl enable data.mount
# systemctl enable data.mount
# systemctl start  data.mount
# systemctl start  data.mount
</syntaxhighlight>
</syntaxhighlight>
=== Check for success ===
=== Check for success ===
<source lang=bash>
<syntaxhighlight lang=bash>
# df -h /dev/mapper/data
# df -h /dev/mapper/data
Filesystem      Size Used Avail Use% Mounted on
Filesystem      Size Used Avail Use% Mounted on

Revision as of 22:47, 25 November 2021


iSCSI with jumbo-frames and multipathing

Configure networking

LACP-bonding for the frontend

/etc/netplan/bond0.yaml

network:
  version: 2
  renderer: networkd
  ethernets:
    eno1:
      dhcp4: false
      dhcp6: false
      optional: true
    eno2:
      dhcp4: false
      dhcp6: false
      optional: true
  bonds:
    bond0:
     interfaces:
     - eno1
     - eno2
     parameters:
       lacp-rate: slow
       mode: 802.3ad
       transmit-hash-policy: layer2
     addresses:
     - 10.71.112.135/16
     gateway4: 10.71.101.1 
     nameservers:
       addresses:
       - 10.71.111.11
       - 10.71.111.12
       search:
       - domain.de

Two dedicated 10GE interfaces with jumbo-frames for the backend

/etc/netplan/iscsi.yaml

network:
  version: 2
  renderer: networkd
  ethernets:
    enp132s0f0:
      dhcp4: false
      dhcp6: false
      mtu: 9000
      addresses:
        - 10.250.71.32/24
      set-name: iscsi0
      match:
        macaddress: a0:36:9f:d4:cd:1a
    enp132s0f1:
      dhcp4: false
      dhcp6: false
      mtu: 9000
      addresses:
        - 10.251.71.32/24
      set-name: iscsi1
      match:
        macaddress: a0:36:9f:d4:cd:18

Apply the parameters and check settings

# netplan apply
# ip a sh iscsi0
7: iscsi0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group default
qlen 1000
link/ether a0:36:9f:d4:cd:1a brd ff:ff:ff:ff:ff:ff
inet 10.250.71.32/24 brd 10.250.71.255 scope global iscsi0
valid_lft forever preferred_lft forever
inet6 fe80::a236:9fff:fed4:cd1a/64 scope link
valid_lft forever preferred_lft forever

# ip a sh iscsi1
5: iscsi1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group default
qlen 1000
link/ether a0:36:9f:d4:cd:18 brd ff:ff:ff:ff:ff:ff
inet 10.251.71.32/24 brd 10.251.71.255 scope global iscsi1
valid_lft forever preferred_lft forever
inet6 fe80::a236:9fff:fed4:cd18/64 scope link
valid_lft forever preferred_lft forever

# ip a sh bond0
12: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 32:2d:f2:c0:e2:3f brd ff:ff:ff:ff:ff:ff
inet 10.71.112.135/16 brd 10.71.255.255 scope global bond0
valid_lft forever preferred_lft forever
inet6 fe80::302d:f2ff:fed0:e23f/64 scope link
valid_lft forever preferred_lft forever

Check if all components are configured right for jumbo-frames

# ping -c 3 -M do -s 8972 -I iscsi0 10.250.71.1
PING 10.250.71.1 (10.250.71.1) from 10.250.71.32 iscsi0: 8972(9000) bytes of data.
8980 bytes from 10.250.71.1: icmp_seq=1 ttl=64 time=0.227 ms
8980 bytes from 10.250.71.1: icmp_seq=2 ttl=64 time=0.187 ms
8980 bytes from 10.250.71.1: icmp_seq=3 ttl=64 time=0.198 ms
--- 10.250.71.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2045ms
rtt min/avg/max/mdev = 0.187/0.204/0.227/0.016 ms

# ping -c 3 -M do -s 8972 -I iscsi1 10.251.71.1
PING 10.251.71.1 (10.251.71.1) from 10.251.71.32 iscsi1: 8972(9000) bytes of data.
8980 bytes from 10.251.71.1: icmp_seq=1 ttl=64 time=0.202 ms
8980 bytes from 10.251.71.1: icmp_seq=2 ttl=64 time=0.195 ms
8980 bytes from 10.251.71.1: icmp_seq=3 ttl=64 time=0.191 ms
--- 10.251.71.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2055ms
rtt min/avg/max/mdev = 0.191/0.196/0.202/0.004 ms

If it does not has success, one of the switches on the way or the iSCSI-storage misses jumbo-frame settings.

Configure iSCSI

Setup initiator iqn

Setup a new iqn: 

# /sbin/iscsi-iname

The result is in /etc/iscsi/initiatorname.iscsi

/etc/iscsi/initiatorname.iscsi

## DO NOT EDIT OR REMOVE THIS FILE!
## If you remove this file, the iSCSI daemon will not start.
## If you change the InitiatorName, existing access control lists
## may reject this initiator.  The InitiatorName must be unique
## for each iSCSI initiator.  Do NOT duplicate iSCSI InitiatorNames.
InitiatorName=iqn.1993-08.org.debian:01:4efdaa48c123

Setup iSCSI-Interfaces

# iscsiadm -m iface -I iscsi0 -o new
# iscsiadm -m iface -I iscsi0 --op=update -n iface.net_ifacename -v iscsi0
# iscsiadm -m iface -I iscsi0
# BEGIN RECORD 2.0-874
iface.iscsi_ifacename = iscsi0
iface.net_ifacename = iscsi0
iface.ipaddress = <empty>
iface.hwaddress = <empty>
iface.transport_name = tcp
...
# END RECORD

# iscsiadm -m iface -I iscsi1 -o new
# iscsiadm -m iface -I iscsi1 --op=update -n iface.net_ifacename -v iscsi1
# iscsiadm -m iface -I iscsi1
# BEGIN RECORD 2.0-874
iface.iscsi_ifacename = iscsi1
iface.net_ifacename = iscsi1
iface.ipaddress = <empty>
iface.hwaddress = <empty>
iface.transport_name = tcp
...
# END RECORD

Discover LUNs that are offered by the storage

# iscsiadm -m discovery -t st -p 10.250.71.1
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: cannot make connection to 10.250.71.1: No route to host
iscsiadm: connection login retries (reopen_max) 5 exceeded
10.250.71.1:3260,1 iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1

# iscsiadm -m discovery -t st -p 10.251.71.1
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: cannot make connection to 10.251.71.1: No route to host
iscsiadm: connection login retries (reopen_max) 5 exceeded
10.251.71.1:3260,2 iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1


Login to discovered LUNs

# iscsiadm -m node -T  iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 --login
Logging in to [iface: iscsi0, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1, portal: 10.250.71.1,3260] (multiple)
Login to [iface: iscsi0, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1, portal: 10.250.71.1,3260] successful.

# iscsiadm -m node -T  iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1 --login
Logging in to [iface: iscsi1, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1, portal: 10.251.71.1,3260] (multiple)
Login to [iface: iscsi1, target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1, portal: 10.251.71.1,3260] successful.

Take a look at the running session

# iscsiadm -m session -P 1
Target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 (non-flash)
        Current Portal: 10.250.71.1:3260,1
        Persistent Portal: 10.250.71.1:3260,1
                **********
                Interface:
                **********
                Iface Name: iscsi0
                Iface Transport: tcp
                Iface Initiatorname: iqn.1993-08.org.debian:01:4efdaa48c123
                Iface IPaddress: 10.250.71.32
                Iface HWaddress: <empty>
                Iface Netdev: iscsi0
                SID: 1
                iSCSI Connection State: LOGGED IN
                iSCSI Session State: LOGGED_IN
                Internal iscsid Session State: NO CHANGE
Target: iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1 (non-flash)
        Current Portal: 10.251.71.1:3260,2
        Persistent Portal: 10.251.71.1:3260,2
                **********
                Interface:
                **********
                Iface Name: iscsi1
                Iface Transport: tcp
                Iface Initiatorname: iqn.1993-08.org.debian:01:4efdaa48c123
                Iface IPaddress: 10.251.71.32
                Iface HWaddress: <empty>
                Iface Netdev: iscsi1
                SID: 2
                iSCSI Connection State: LOGGED IN
                iSCSI Session State: LOGGED_IN
                Internal iscsid Session State: NO CHANGE


Check the session is still ok after a restart of iscsid.service

# systemctl status iscsid.service
# systemctl restart iscsid.service
# systemctl status iscsid.service
# iscsiadm -m session -o show
tcp: [1] 10.251.71.1:3260,2 iqn.2006-
08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1 (non-flash)
tcp: [2] 10.250.71.1:3260,1 iqn.2006-
08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 (non-flash)

Enable automatic startup of connection

# iscsiadm -m node --op=update -n node.conn[0].startup -v automatic
# iscsiadm -m node --op=update -n node.startup -v automatic

Check timeout parameter

# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1 |  grep node.session.timeo.replacement_timeout
node.session.timeo.replacement_timeout = 120

# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1 |  grep node.session.timeo.replacement_timeout
node.session.timeo.replacement_timeout = 120

Adjust timeout values to your needs

# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20000:10.250.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10
# iscsiadm -m node -T iqn.2006-08.com.huawei:oceanstor:210028def5f846b5::20001:10.251.71.1  -o update -n  node.session.timeo.replacement_timeout -v 10

Configure multipathing

List SCSI devices

# lsscsi
[0:2:0:0]    disk    DELL     PERC H730 Mini   4.30  /dev/sda   <--- this is our internal disk / raid
[11:0:0:0]   cd/dvd  HL-DT-ST DVD+-RW GTA0N    A3C0  /dev/sr0
[12:0:0:1]   disk    HUAWEI   XSG1             4305  /dev/sdb   <--- this is our iSCSI-storage
[13:0:0:1]   disk    HUAWEI   XSG1             4305  /dev/sdc   <--- this is our iSCSI-storage

Get wwids for devices

# /lib/udev/scsi_id --whitelisted --device=/dev/sda
361866da075bdee001f9a2ede2705b9ba
# /lib/udev/scsi_id --whitelisted --device=/dev/sdb
3628dee5100f846b5243be07d00000004
# /lib/udev/scsi_id --whitelisted --device=/dev/sdc
3628dee5100f846b5243be07d00000004

Setup multipathing configuration

/etc/multipath.conf

defaults {
    user_friendly_names yes
}
devices {
  device {
    vendor                  "HUAWEI"
    product                 "XSG1"
    path_grouping_policy    multibus
    path_checker            tur
    prio                    const
    path_selector           "round-robin 0"
    failback                immediate
    no_path_retry           15
  }
}
blacklist {
  # devnode "^sd[a]$"
  # I highly recommend you blacklist by wwid instead of device name
     
  # blacklist /dev/sda by wwid
  wwid 361866da075bdee001f9a2ede2705b9ba
}
multipaths {
  multipath {
    wwid 3628dee5100f846b5243be07d00000004
    # alias here can be anything descriptive for your LUN
    alias data
  }
}

Startup multipathing

From the multipath(1) man page: 

-r Force a reload of all existing multipath maps. This command is delegated to the
multipathd daemon if it's running. In this case, other command line switches of the multipath
command have no effect.
-ll Show ("list") the current multipath topology from all available information (sysfs, the
device mapper, path checkers ...).

# multipath -r

# multipath -ll
data (3628dee5100f846b5243be07d00000004) dm-0 HUAWEI,XSG1
size=10T features='1 queue_if_no_path' hwhandler='1 alua' wp=rw
`-+- policy='round-robin 0' prio=50 status=active
  |- 12:0:0:1 sdb 8:16 active ready running
  `- 13:0:0:1 sdc 8:32 active ready running

# ls -al /dev/mapper/data
lrwxrwxrwx 1 root root 7 Okt 18 14:46 /dev/mapper/data -> ../dm-0

Create a systemd unit to mount it at the right time during boot

# systemctl edit --force --full data.mount

/etc/systemd/system/data.mount

[Unit]
Before=remote-fs.target
After=iscsi.service
Requires=iscsi.service
After=blockdev@dev-mapper-data.target

[Mount]
Where=/data
What=/dev/mapper/data
Type=xfs
Options=defaults

Enable your unit on next reboot and start it for now

# systemctl enable data.mount
# systemctl start  data.mount

Check for success

# df -h /dev/mapper/data
Filesystem       Size Used Avail Use% Mounted on
/dev/mapper/data  10T  72G   10T   1% /data

Further reading

External link collection: 

   • https://linux.dell.com/files/whitepapers/iSCSI_Multipathing_in_Ubuntu_Server.pdf
   • https://www.suse.com/support/kb/doc/?id=000019648
   • https://ubuntu.com/server/docs/service-iscsi
   •
Retrieved from "https://lars.timmann.de/wiki/index.php?title=ISCSI_Initiator_with_Linux&oldid=2397"