Solaris 11 Networking: Difference between revisions

From Lolly's Wiki
Jump to navigationJump to search
No edit summary
m (Text replacement - "</source" to "</syntaxhighlight")
Line 102: Line 102:
zonecfg:zone01> commit
zonecfg:zone01> commit
zonecfg:zone01> exit
zonecfg:zone01> exit
</source>
</syntaxhighlight>


== Change address ==
== Change address ==
Line 151: Line 151:
PROTO PROPERTY            PERM CURRENT      PERSISTENT  DEFAULT      POSSIBLE
PROTO PROPERTY            PERM CURRENT      PERSISTENT  DEFAULT      POSSIBLE
tcp  smallest_anon_port  rw  1024        --          1024        1024-65535
tcp  smallest_anon_port  rw  1024        --          1024        1024-65535
</source>
</syntaxhighlight>


<source lang=bash>
<source lang=bash>
Line 158: Line 158:
# ipadm set-prop -p largest_anon_port=65500 tcp
# ipadm set-prop -p largest_anon_port=65500 tcp
# ipadm set-prop -p largest_anon_port=65500 udp
# ipadm set-prop -p largest_anon_port=65500 udp
</source>
</syntaxhighlight>


= Jumbo Frames =
= Jumbo Frames =
Line 168: Line 168:
# ipadm enable-if -t iscsi0
# ipadm enable-if -t iscsi0
# ipadm set-ifprop -m ipv4 -p mtu=9000 iscsi0  
# ipadm set-ifprop -m ipv4 -p mtu=9000 iscsi0  
</source>
</syntaxhighlight>


= Aggregate for iSCSI =
= Aggregate for iSCSI =
Line 188: Line 188:
--                  iscsi6      no          no  no  no  yes      no
--                  iscsi6      no          no  no  no  yes      no
--                  iscsi7      no          no  no  no  yes      no
--                  iscsi7      no          no  no  no  yes      no
</source>
</syntaxhighlight>


= Set TCP parameters in immutable zones =
= Set TCP parameters in immutable zones =
Line 199: Line 199:
PROTO PROPERTY              PERM CURRENT      PERSISTENT  DEFAULT      POSSIBLE
PROTO PROPERTY              PERM CURRENT      PERSISTENT  DEFAULT      POSSIBLE
tcp  _time_wait_interval  rw  30000        --          60000        1000-600000
tcp  _time_wait_interval  rw  30000        --          60000        1000-600000
</source>
</syntaxhighlight>


Need to boot into writable:
Need to boot into writable:
Line 212: Line 212:


root@global# zoneadm -z immutable-zone reboot   
root@global# zoneadm -z immutable-zone reboot   
</source>
</syntaxhighlight>

Revision as of 17:53, 25 November 2021

Switch to manual configuration

To disable automatic procedures to take back your changes you have to enable the manual configuration mode. 

# netadm enable -p ncp DefaultFixed

Nodename

# svccfg -s svc:/system/identity:node setprop config/nodename = astring: camponotus
# svcadm refresh svc:/system/identity:node
# svcadm restart svc:/system/identity:node

Interfaces

Initial setup

# ipadm create-ip net1 
# ipadm create-addr -T static -a local=192.168.5.101/24 net1/v4mailcluster1

IPMP

# ipadm create-ip net2
# ipadm create-ip net3
# ipadm create-addr -T static -a 192.168.5.102/24 net2/v4ipmptestadress
# ipadm create-addr -T static -a 192.168.5.103/24 net3/v4ipmptestadress
# ipadm create-ipmp ipmp0
# ipadm add-ipmp -i net2 -i net3 ipmp0
# ipadm create-addr -T static -a 192.168.5.101/24 ipmp0/v4mailcluster0

# ipmpstat -i
INTERFACE   ACTIVE  GROUP       FLAGS     LINK      PROBE     STATE
net2        yes     ipmp0       -------   up        ok        ok
net3        yes     ipmp0       --mbM--   up        ok        ok

# ipmpstat -an
ADDRESS                   STATE  GROUP       INBOUND     OUTBOUND
::                        down   ipmp0       --          --
192.168.5.101              up     ipmp0       net3        net2 net3

Set one interface to standby: 

# ipadm set-ifprop -p standby=on -m ip net2
# ipmpstat -i
INTERFACE   ACTIVE  GROUP       FLAGS     LINK      PROBE     STATE
net3        yes     ipmp0       --mbM--   up        ok        ok
net2        no      ipmp0       is-----   up        ok        ok
# ipmpstat -g
GROUP       GROUPNAME   STATE     FDT       INTERFACES
ipmp0       ipmp0       ok        10.00s    net3 (net2)

More sophisticated with aggregations and vnics

<source lang=bash>

  1. dladm show-phys -L

LINK DEVICE LOC net0 igb12 /SYS/MB net1 igb13 /SYS/MB net2 igb14 /SYS/MB net3 igb15 /SYS/MB net4 igb0 /SYS/MB/PCI_MEZZ/PCIE3 net5 igb1 /SYS/MB/PCI_MEZZ/PCIE3 net6 igb2 /SYS/MB/PCI_MEZZ/PCIE3 net7 igb3 /SYS/MB/PCI_MEZZ/PCIE3 net8 igb4 /SYS/MB/RISER2/PCIE2 net9 igb5 /SYS/MB/RISER2/PCIE2 net10 igb6 /SYS/MB/RISER2/PCIE2 net11 igb7 /SYS/MB/RISER2/PCIE2 net12 igb8 /SYS/MB/RISER0/PCIE0 net13 igb9 /SYS/MB/RISER0/PCIE0 net14 igb10 /SYS/MB/RISER0/PCIE0 net15 igb11 /SYS/MB/RISER0/PCIE0 net16 usbecm2 --

  1. dladm create-aggr -P L2,L3 -l net8 -l net9 -l net10 -l net11 PCIE2
  2. dladm create-aggr -P L2,L3 -l net4 -l net5 -l net6 -l net7 PCIE3
  3. dladm show-link

... PCIE2 aggr 1500 up net8 net9 net10 net11 PCIE3 aggr 1500 up net4 net5 net6 net7 ...

  1. dladm create-vnic -l PCIE2 zone01_ipmp0
  2. dladm create-vnic -l PCIE3 zone01_ipmp1
  3. dladm show-link

... zone01_ipmp1 vnic 1500 up PCIE3 zone01_ipmp0 vnic 1500 up PCIE2 ...

  1. zonecfg -z zone01

zonecfg:zone01> add net zonecfg:zone01:net> set configure-allowed-address=true zonecfg:zone01:net> set physical=zone01_ipmp0 zonecfg:zone01:net> end zonecfg:zone01> add net zonecfg:zone01:net> set configure-allowed-address=true zonecfg:zone01:net> set physical=zone01_ipmp1 zonecfg:zone01:net> end zonecfg:zone01> verify zonecfg:zone01> commit zonecfg:zone01> exit </syntaxhighlight>

Change address

1. Create new interface: 

# ipadm create-addr -T static -a 192.168.5.111/24 ipmp0/v4mailcluster1

2. Login to new IP.

3. Delete the old interface: 

# ipadm delete-addr ipmp0/v4mailcluster0

DNS

Client

# svccfg -s svc:/network/dns/client setprop config/nameserver = net_address: "( 0.0.0.0 192.168.1.1 )"
# svccfg -s svc:/network/dns/client setprop config/search = astring: "timmann.de blindhuhn.de"
# svcadm refresh svc:/network/dns/client:default
# svcadm restart svc:/network/dns/client:default

Activate dns in nameservice switch (nsswitch.conf): 

# perl -pi -e "s/^hosts:\s+files$/hosts: files dns/g" /etc/nsswitch.conf
# nscfg import -f svc:/system/name-service/switch:default
# svcadm refresh name-service/switch
# svcprop -p config/host svc:/system/name-service/switch:default
files\ dns

Server

# groupadd -g 53 dns
# useradd -u 53 -g dns -d /var/named -m dns
# usermod -A solaris.smf.manage.bind dns
# svccfg -s svc:network/dns/server:default setprop start/group = dns
# svccfg -s svc:network/dns/server:default setprop start/user  = dns
# svccfg -s svc:network/dns/server:default setprop options/ip_interfaces = IPv4
# svccfg -s svc:network/dns/server:default setprop options/configuration_file = /etc/named.conf
# svcadm refresh svc:network/dns/server:default
# svcadm enable  svc:network/dns/server:default

Set tcp/udp parameter (formerly ndd)

<source lang=bash>

  1. ipadm show-prop -p smallest_anon_port tcp

PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE tcp smallest_anon_port rw 1024 -- 1024 1024-65535 </syntaxhighlight>

<source lang=bash>

  1. ipadm set-prop -p smallest_anon_port=9000 tcp
  2. ipadm set-prop -p smallest_anon_port=9000 udp
  3. ipadm set-prop -p largest_anon_port=65500 tcp
  4. ipadm set-prop -p largest_anon_port=65500 udp

</syntaxhighlight>

Jumbo Frames

The MTU of an ipadm-interface can never be greater than its underlying dladm-interface. To change the dladm-interface the ipadm-interface has to be disabled (DOWNTIME!? BE CAREFUL!). <source lang=bash>

  1. ipadm disable-if -t iscsi0
  2. dladm set-linkprop -p mtu=9000 iscsi0
  3. ipadm enable-if -t iscsi0
  4. ipadm set-ifprop -m ipv4 -p mtu=9000 iscsi0

</syntaxhighlight>

Aggregate for iSCSI

This is cruel but worked on our ciscos: <source lang=bash>

  1. dladm create-aggr -m trunk -P L4 -L off "-l iscsi"{0..7} iscsi_aggr0 | /bin/sh
  2. dladm show-aggr -P iscsi_aggr0

LINK MODE POLICY ADDRPOLICY LACPACTIVITY LACPTIMER iscsi_aggr0 trunk L4 auto off short

  1. dladm show-aggr -L iscsi_aggr0

LINK PORT AGGREGATABLE SYNC COLL DIST DEFAULTED EXPIRED iscsi_aggr0 iscsi0 no no no no yes no -- iscsi1 no no no no yes no -- iscsi2 no no no no yes no -- iscsi3 no no no no yes no -- iscsi4 no no no no yes no -- iscsi5 no no no no yes no -- iscsi6 no no no no yes no -- iscsi7 no no no no yes no </syntaxhighlight>

Set TCP parameters in immutable zones

In normal immutable mode zlogin -U does not change it: <source lang=bash> root@global# zlogin -U immutable-zone ipadm set-prop -p _time_wait_interval=30000 tcp ipadm: set-prop: _time_wait_interval: Invalid argument provided

root@global# zlogin immutable-zone ipadm show-prop -p _time_wait_interval tcp PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE tcp _time_wait_interval rw 30000 -- 60000 1000-600000 </syntaxhighlight>

Need to boot into writable: <source lang=bash> root@global# zoneadm -z immutable-zone reboot -w

root@global# zlogin -U immutable-zone ipadm set-prop -p _time_wait_interval=30000 tcp

root@global# zlogin immutable-zone ipadm show-prop -p _time_wait_interval tcp PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE tcp _time_wait_interval rw 30000 30000 60000 1000-600000

root@global# zoneadm -z immutable-zone reboot </syntaxhighlight>

Retrieved from "https://lars.timmann.de/wiki/index.php?title=Solaris_11_Networking&oldid=2310"